EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Jabon (Anthocephalus cadamba) Laminated Board Properties with Impregnation of Citric Acid, Boric Acid, and Polystyrene

Rudi Hartono, Raynata Andini Br Tarigan, Muhammad Navis Rofii iD, Ihak Sumardi, Aprilia Kartikawati, Jajang Sutiawan iD, Falah Abu iD, A M Radzi

Polymers · 30.08.2025 · 17 (17) · 2367

DOI: 10.3390/polym17172367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.08.2025. Verfasst von Rudi Hartono und 7 weiteren Autor:innen. Beteiligte Einrichtung: Forest Products Department, Faculty of Forestry, Universitas Sumatera Utara, Medan 20155, Indonesia. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Riset Kolaborasi Indonesia Universitas Sumatera Utara (USU), Riset Kolaborasi Indonesia Universitas Sumatera Utara (USU) of the Republic of Indonesia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A good way to produce large-sized wood products from small-diameter logs is by using laminated boards. The lamina undergoes an impregnation pretreatment to improve its quality before being formed into laminated boards (LBs). This research was performed to analyze the effects of an impregnation treatment on Jabon lamina with citric acid, boric acid, and polystyrene solutions on the physical and mechanical properties of Jabon LB. The Jabon lamina was first pretreated with citric acid, boric acid, and polystyrene by vacuuming for 30 min and pressing for 30 min at a pressure of 6.6 bar. The laminas were glued using isocyanate adhesive with a spreading rate of 280 g/m2, consisting of three layers, which were cold pressed for 24 h. LB’s physical and mechanical properties were affected by the nature of the impregnating agent. Impregnating the lamina with citric acid and boric acid increased the density and moisture content of the laminated board, decreasing its mechanical properties. On the contrary, polystyrene-impregnated LB improved. After soaking in hot water, no LB displayed delamination, indicating high bonding performance. The best impregnating agent for lamina pretreatment was polystyrene, followed by boric acid and citric acid. The chemical compound, functional group, and degree of crystallinity of treated Jabon LB all changed due to the impregnation process.

Schlagwörter

Stichwörter der Autor:innen

boric acidcitric acidimpregnationlaminated boardmodificationpolystyrene

Autor:innen und Institutionen

  • Forest Products Department, Faculty of Forestry, Universitas Sumatera Utara, Medan 20155, Indonesia.
  • Faculty of Forestry, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia.
  • School of Life Sciences and Technology, Institut Teknologi Bandung, Bandung 40132, Indonesia.
  • Research Center for Biomass and Bioproducts, National Research and Innovation Agency, Cibinong 16911, Indonesia.
  • Faculty of Applied Sciences, Universiti Teknologi MARA (UiTM), Shah Alam 40450, Selangor, Malaysia.
  • Smart Manufacturing Research Institute (SMRI), Universiti Teknologi MARA (UiTM), Shah Alam 40450, Selangor, Malaysia.

ORCID-Profile: Muhammad Navis Rofii, Jajang Sutiawan, Falah Abu

Förderung

  • Riset Kolaborasi Indonesia Universitas Sumatera Utara (USU)
  • Riset Kolaborasi Indonesia Universitas Sumatera Utara (USU) of the Republic of Indonesia

Zitieren

APA

Hartono, R., Tarigan, R. A. B., Rofii, M. N., Sumardi, I., Kartikawati, A., Sutiawan, J., Abu, F., & Radzi, A. M. (2025). Enhancing Jabon (Anthocephalus cadamba) Laminated Board Properties with Impregnation of Citric Acid, Boric Acid, and Polystyrene. Polymers, 17(17), 2367. https://doi.org/10.3390/polym17172367

Vancouver

Hartono R, Tarigan RAB, Rofii MN, Sumardi I, Kartikawati A, Sutiawan J, et al. Enhancing Jabon (Anthocephalus cadamba) Laminated Board Properties with Impregnation of Citric Acid, Boric Acid, and Polystyrene. Polymers. 2025;17(17):2367. doi:10.3390/polym17172367

BibTeX
@article{Hartono2025,
  author = {Hartono, Rudi and Tarigan, Raynata Andini Br and Rofii, Muhammad Navis and Sumardi, Ihak and Kartikawati, Aprilia and Sutiawan, Jajang and Abu, Falah and Radzi, A M},
  title = {Enhancing Jabon (Anthocephalus cadamba) Laminated Board Properties with Impregnation of Citric Acid, Boric Acid, and Polystyrene},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {17},
  pages = {2367},
  doi = {10.3390/polym17172367}
}
Kostenlos starten →