EUVIMEDEUVIMED entdecken
Crossref

INFLUENCE OF VIBRATION-CENTRIFUGAL HARDENING PARAMETERS ON THE SURFACE QUALITY OF MACHINE PART ZONES WITH STRESS CONCENTRATIONS

Ivan Klymash, Andriy Kuk, Nadiia Ratska

Ukrainian Journal of Mechanical Engineering and Materials Science · 2026 · 12 (2) · 1-10

DOI: 10.23939/ujmems2026.02.001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ukrainian Journal of Mechanical Engineering and Materials Science, 2026. Verfasst von Ivan Klymash und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the effect of vibration-centrifugal hardening (VCH) parameters on the microhardness and surface integrity of critical zones. The study focuses on a groove that precisely replicates the profile of a metric thread in 105WC6 steel specimens. This groove is a typical stress concentrator in heavily loaded machine components, making it a critical zone for enhancing fatigue resistance. The methodology involves experimental analysis of microstructural changes and microhardness distribution on metallographic cross-sections before and after VCH treatment. The initial microhardness of the bulk material was 1.6 GPa, while the machined concentration zone already exhibited 2.2 GPa due to work hardening. Application of VCH resulted in a significant further increase: the microhardness at the root of the thread-like groovereached a maximum of 2.9 GPa. This represents an 31.8 % increase in hardness compared to the initial machined state of the concentration zone. The results confirm the VCH process’s high effectiveness in generating a robust work-hardened layer and increasing the overall surface hardness of the critical zone. The novelty of this research lies in the detailed quantitative correlation established for a high-strength tool steel (105WC6), with a focus on the microhardness distribution at the root of the thread-like groove. This study analyzes the coupled effects of VCH utilizing hardened rollers on this specific geometry and material, providing a comprehensive analysis of the induced compressive stress field and localized hardening. The practical value is the potential to extend the service life and performance of machine parts subjected to dynamic loads. Future research will focus on the ultimate fatigue resistance of treated metric threads, validating the current results.

Zitieren

APA

Klymash, I., Kuk, A., & Ratska, N. (2026). INFLUENCE OF VIBRATION-CENTRIFUGAL HARDENING PARAMETERS ON THE SURFACE QUALITY OF MACHINE PART ZONES WITH STRESS CONCENTRATIONS. Ukrainian Journal of Mechanical Engineering and Materials Science, 12(2), 1-10. https://doi.org/10.23939/ujmems2026.02.001

Vancouver

Klymash I, Kuk A, Ratska N. INFLUENCE OF VIBRATION-CENTRIFUGAL HARDENING PARAMETERS ON THE SURFACE QUALITY OF MACHINE PART ZONES WITH STRESS CONCENTRATIONS. Ukrainian Journal of Mechanical Engineering and Materials Science. 2026;12(2):1-10. doi:10.23939/ujmems2026.02.001

BibTeX
@article{Klymash2026,
  author = {Klymash, Ivan and Kuk, Andriy and Ratska, Nadiia},
  title = {INFLUENCE OF VIBRATION-CENTRIFUGAL HARDENING PARAMETERS ON THE SURFACE QUALITY OF MACHINE PART ZONES WITH STRESS CONCENTRATIONS},
  journal = {Ukrainian Journal of Mechanical Engineering and Materials Science},
  year = {2026},
  volume = {12},
  number = {2},
  pages = {1--10},
  doi = {10.23939/ujmems2026.02.001}
}
Kostenlos starten →