ANALYSIS OF MODERN METHODS AND MEANS OF MONITORING AND ASSESSING THE TECHNICAL CONDITION OF PDC DRILLING BITS IN THE DRILLING PROCESS
Measuring Equipment and Metrology · 2026 · 87 (2) · 61-67
DOI: 10.23939/istcmtm2026.02.061 ↗Kurz gefasst
Fachartikel in der Zeitschrift Measuring Equipment and Metrology, 2026. Verfasst von Liudmyla Chyhur und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.
Abstract (Originalsprache)
The analysis of modern methods and means of monitoring and assessing the technical condition of PDC drill bits under conditions of stochastic uncertainty of the drilling process was carried out. The relevance of the problem of increasing the efficiency of well construction by timely detection of degradation processes in the rock-breaking tool, which directly affect the mechanical rate of penetration, energy intensity of rock destruction and the total duration of drilling was substantiated. The generalization of physical and mechanical processes of PDC-bit wear, in particular abrasive, shock-fatigue, thermal and tribocorrosion destruction, was carried out, and their manifestations in the change of operational parameters were analyzed. Modern approaches to collecting primary information based on MWD/LWD telemetric systems, vibration, acoustic, temperature and energy sensors were considered. It was found that the integration of multisensor data allows to increase the informativeness of diagnostics, however, it is accompanied by limitations associated with the low bandwidth of communication channels, the influence of noise and the fragmentation of measurements. The existing criteria for assessing the technical condition of drill bits are analyzed, in particular the indicators of mechanical penetration rate, specific fracture energy and vibration activity, and approaches to their formalization in the form of wear functions and integral efficiency indicators are considered. The feasibility of using machine learning methods, Bayesian models and explanatory artificial intelligence algorithms for integrating heterogeneous data and increasing the reliability of diagnostic solutions under conditions of uncertainty is substantiated. It is established that a promising direction is the use of the concept of peripheral computing with the implementation of data pre-processing directly in the downhole module, which allows to minimize the volume of telemetric information and ensure prompt adaptation of drilling mode parameters. An approach to building an integrated monitoring system combining sensor modules, intelligent data processing algorithms and dispatching control tools is proposed, aimed at increasing the efficiency of decision-making regarding drilling process management and timely tool replacement. The results obtained can be used in the development of intelligent automated drilling control systems aimed at increasing the technical and economic performance of well construction and reducing the risks of premature failure of drilling tools
Zitieren
APA
Chyhur, L., Lahoida, A., & Chyhur, I. (2026). ANALYSIS OF MODERN METHODS AND MEANS OF MONITORING AND ASSESSING THE TECHNICAL CONDITION OF PDC DRILLING BITS IN THE DRILLING PROCESS. Measuring Equipment and Metrology, 87(2), 61-67. https://doi.org/10.23939/istcmtm2026.02.061
Vancouver
Chyhur L, Lahoida A, Chyhur I. ANALYSIS OF MODERN METHODS AND MEANS OF MONITORING AND ASSESSING THE TECHNICAL CONDITION OF PDC DRILLING BITS IN THE DRILLING PROCESS. Measuring Equipment and Metrology. 2026;87(2):61-67. doi:10.23939/istcmtm2026.02.061
BibTeX
@article{Chyhur2026,
author = {Chyhur, Liudmyla and Lahoida, Andrii and Chyhur, Ihor},
title = {ANALYSIS OF MODERN METHODS AND MEANS OF MONITORING AND ASSESSING THE TECHNICAL CONDITION OF PDC DRILLING BITS IN THE DRILLING PROCESS},
journal = {Measuring Equipment and Metrology},
year = {2026},
volume = {87},
number = {2},
pages = {61--67},
doi = {10.23939/istcmtm2026.02.061}
}
EUVIMED