Research on Digital Simulation and Design Methods of Vertical-Wheel PDC Drill Bits
Processes · 25.03.2026 · 14 (7) · 1041
DOI: 10.3390/pr14071041 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 25.03.2026. Verfasst von Yan Yang und 5 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Sichuan SMT printing engineering technology research center.
Abstract (Originalsprache)
The vertical-wheel PDC bit adds a rotatable wheel cutter to conventional fixed PDC blades, creating a dual-structure cooperative rock-breaking system. A synergistic design theory is established through the following consecutive steps. Firstly, a fully coupled digital model of the wheel cutters, fixed blades and rock was built; load-calculation methods for each cutter type were derived, enabling the WOB distribution to be predicted by simulation. Secondly, for complex drilling modes, such as mixed-mode rotary steering, the wheel must be located at the instantaneous resultant force point of the bit to maximize buffering and torque mitigation; the locus of this point was traced while drilling. Thirdly, a proportional relationship between relative cutter exposure and weight on bit share was validated and used to synchronize the cutting trajectories of the two structures. Finally, systematic design criteria for wheel diameter, shaft inclination, normal offset, offset distance, cutter shape and wheel count were formulated. The results provide a theoretical basis and a technical roadmap for high-efficiency, long-life VW-PDC bit design.
Förderung
- National Natural Science Foundation of China
- State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation
- Sichuan SMT printing engineering technology research center
Zitieren
APA
Yang, Y., Yang, Y., Qiu, S., Ren, H., Chen, L., & Huang, Z. (2026). Research on Digital Simulation and Design Methods of Vertical-Wheel PDC Drill Bits. Processes, 14(7), 1041. https://doi.org/10.3390/pr14071041
Vancouver
Yang Y, Yang Y, Qiu S, Ren H, Chen L, Huang Z. Research on Digital Simulation and Design Methods of Vertical-Wheel PDC Drill Bits. Processes. 2026;14(7):1041. doi:10.3390/pr14071041
BibTeX
@article{Yang2026,
author = {Yang, Yan and Yang, Yingxin and Qiu, Shunzuo and Ren, Haitao and Chen, Lian and Huang, Zequan},
title = {Research on Digital Simulation and Design Methods of Vertical-Wheel PDC Drill Bits},
journal = {Processes},
year = {2026},
volume = {14},
number = {7},
pages = {1041},
doi = {10.3390/pr14071041}
}
EUVIMED