EUVIMEDOpdag EUVIMED
Crossref

Obtaining of Mullite and Mullite-Corund Pigments by Solid-State Synthesis and Application Aspects

Irena Markovska, Fila Yovkova, Mariela Minova, Adriana Georgieva

Chemistry & Chemical Technology · 2026-06-25 · 20 (2) · 327-336

DOI: 10.23939/chcht20.02.327 ↗

At a glance

Journal article in Chemistry & Chemical Technology, published online on 2026-06-19. Written by Irena Markovska and 3 co-authors. 16 references.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The work is focused on the preparation and study of mullite and mullite corundum pigments, as well as the consideration of aspects of their application. Ceramic pigments in the Al2O3-SiO2 system, doped with Co, Cu, and Ni, were synthesized from pure and waste raw materials using a cost-effective solid-state method at a temperature of 1450°C. Two series of compositions were prepared. One series contained only pure starting materials, and the other - waste materials. Silica was introduced into the ceramic masses either as amorphous SiO2.nH2O, or as air-burned rice husk ash - RHA. The chromophore ions of Co2+, Cu2+, or Ni2+ were added in an amount of 8.0 wt.%. The obtained mullite and mullite corundum pigments were studied using mainly the methods of Differential Scanning Calorimetry (DSC), X-ray Diffraction Analysis (XRD), Scanning Electron Microscopy (SEM), and Spectral Color Measurement. X-ray analysis proves that the main phases in the synthesized pigments are mullite and corundum. The microstructure, morphology, and the influence of the nature of the introduced silica source in the starting compositions on the color characteristics of the resulting pigments (color, color hue, brightness) were studied and demonstrated by SEM analysis. The color characteristics of the synthesized pigments were determined spectrally, with the best results being obtained for pigments with a cobalt chromophore, where (b) = -24.3 when using SiO2.nH2O and (b) = -27.6 when using RHA. The possibility of using the synthesized mullite and mullite-corundum pigments in real production conditions was studied in the ceramic tile factory Khan Omurtag, Bulgaria.

Cite

APA

Markovska, I., Yovkova, F., Minova, M., & Georgieva, A. (2026). Obtaining of Mullite and Mullite-Corund Pigments by Solid-State Synthesis and Application Aspects. Chemistry & Chemical Technology, 20(2), 327-336. https://doi.org/10.23939/chcht20.02.327

Vancouver

Markovska I, Yovkova F, Minova M, Georgieva A. Obtaining of Mullite and Mullite-Corund Pigments by Solid-State Synthesis and Application Aspects. Chemistry & Chemical Technology. 2026;20(2):327-336. doi:10.23939/chcht20.02.327

BibTeX
@article{Markovska2026,
  author = {Markovska, Irena and Yovkova, Fila and Minova, Mariela and Georgieva, Adriana},
  title = {Obtaining of Mullite and Mullite-Corund Pigments by Solid-State Synthesis and Application Aspects},
  journal = {Chemistry & Chemical Technology},
  year = {2026},
  volume = {20},
  number = {2},
  pages = {327--336},
  doi = {10.23939/chcht20.02.327}
}
Start for free →