EUVIMEDEUVIMED entdecken
Crossref

Integrating Additive Manufacturing and Composite Manufacturing Techniques to Build a General-Purpose UAV

Turan Konyalıoğlu, Sinan Alnıpak, Halil İbrahim Şahin, Erdinç Altuğ

International Journal of Aviation Science and Technology · 26.06.2025 · vm06 (is02) · 91-105

DOI: 10.23890/ijast.vm06is02.0203 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Aviation Science and Technology, online erschienen am 26.06.2025. Verfasst von Turan Konyalıoğlu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of unmanned aerial vehicles (UAVs) and their integration into our daily life have rapidly accelerated in recent years. Despite these advancements, the production of UAVs often requires specialized and costly equipment. However, with the rapid evolution of additive manufacturing (AM) technologies, it is now possible to design lightweight, optimized structures that can be manufactured easily and quickly. This approach enables faster design iterations, reduces the need for multiple parts and material usage during production, and significantly minimizes waste. A hybrid UAV combines the advantages of vertical take-off and landing (VTOL) capabilities with the efficient cruising performance of a fixed-wing aircraft. This study investigates the feasibility of using AM for the manufacturing of a 3.8-meter wingspan hybrid UAV. The system consists of two components: a hybrid aircraft and a parachute drone carried by the hybrid aircraft. Following the mechanical and aerodynamic design of the air vehicle, it was fabricated using a rapid prototyping approach that integrates AM and composite production techniques. This study demonstrates that even large-scale UAVs can be produced with AM-supported design and manufacturing. This method supports on-demand customization, reduces material waste, and promotes innovation and sustainability in UAV production. It is anticipated that this approach can make UAV production more accessible to the general public, potentially accelerating the development of UAV technology.

Zitieren

APA

Konyalıoğlu, T., Alnıpak, S., Şahin, H. İ., & Altuğ, E. (2025). Integrating Additive Manufacturing and Composite Manufacturing Techniques to Build a General-Purpose UAV. International Journal of Aviation Science and Technology, vm06(is02), 91-105. https://doi.org/10.23890/ijast.vm06is02.0203

Vancouver

Konyalıoğlu T, Alnıpak S, Şahin Hİ, Altuğ E. Integrating Additive Manufacturing and Composite Manufacturing Techniques to Build a General-Purpose UAV. International Journal of Aviation Science and Technology. 2025;vm06(is02):91-105. doi:10.23890/ijast.vm06is02.0203

BibTeX
@article{Konyalolu2025,
  author = {Konyalıoğlu, Turan and Alnıpak, Sinan and Şahin, Halil İbrahim and Altuğ, Erdinç},
  title = {Integrating Additive Manufacturing and Composite Manufacturing Techniques to Build a General-Purpose UAV},
  journal = {International Journal of Aviation Science and Technology},
  year = {2025},
  volume = {vm06},
  number = {is02},
  pages = {91--105},
  doi = {10.23890/ijast.vm06is02.0203}
}
Kostenlos starten →