EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Topology Optimization Design and Performance Comparison of a Land–Air UAV Rotary Arm Integrating Additive Manufacturing Constraints

Yixiang Chen, Menghao Ran, Shiyun Lin, Yuhuan Du

Machines · 24.04.2026 · 14 (5) · 474

DOI: 10.3390/machines14050474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 24.04.2026. Verfasst von Yixiang Chen und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chongqing Jiaotong University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study achieves a 30.8% mass reduction in amphibious UAV rotary arms via additive manufacturing-constrained topology optimization (AM-constrained TO), establishing lightweight design as the primary objective. To evaluate structural efficiency, we systematically compare three strategies: AM-constrained TO, Hexagonal Honeycomb infill (HC), and central lightening holes (ES). All configurations target comparable mass reduction. Using the SIMP method with manufacturing constraints, TO designs were generated. FEA and tensile tests evaluated stiffness, strength, failure modes, and Specific Energy Absorption (SEA). The key innovation lies in the TO approach: It achieves the primary objective of 30.8% mass reduction while simultaneously enhancing structural integrity and outperforming HC, ES, and Solid Baseline (SB) configurations in stiffness (2234 ± 76 MPa), Specific Energy Absorption (742 ± 29 J/m3), and stress distribution uniformity. The HC configuration shows progressive collapse but has the lowest stiffness (886 ± 17 MPa) and SEA (432 ± 5 J/m3) due to FDM inter-layer bonding limits. The ES configuration has the second-highest tensile strength (19.489 ± 0.19 MPa), but stress concentration around the hole reduces energy absorption, resulting in lower SEA (620 ± 15 J/m3) than TO.

Förderung

  • Chongqing Jiaotong University

Zitieren

APA

Chen, Y., Ran, M., Lin, S., & Du, Y. (2026). Topology Optimization Design and Performance Comparison of a Land–Air UAV Rotary Arm Integrating Additive Manufacturing Constraints. Machines, 14(5), 474. https://doi.org/10.3390/machines14050474

Vancouver

Chen Y, Ran M, Lin S, Du Y. Topology Optimization Design and Performance Comparison of a Land–Air UAV Rotary Arm Integrating Additive Manufacturing Constraints. Machines. 2026;14(5):474. doi:10.3390/machines14050474

BibTeX
@article{Chen2026,
  author = {Chen, Yixiang and Ran, Menghao and Lin, Shiyun and Du, Yuhuan},
  title = {Topology Optimization Design and Performance Comparison of a Land–Air UAV Rotary Arm Integrating Additive Manufacturing Constraints},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {5},
  pages = {474},
  doi = {10.3390/machines14050474}
}
Kostenlos starten →