EUVIMEDEUVIMED entdecken
Crossref

Microstructure characteristics and cavitation erosion resistance of Co-based coating fabricated via laser cladding

Jie Zhang, Qing Xu, Qiang Ding, Jiawei Duan, Yajing Xu, Fengtao Ji

Journal of Laser Applications · 01.02.2025 · 37 (1)

DOI: 10.2351/7.0001673 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 05.02.2025. Verfasst von Jie Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Marine centrifugal pumps are important mechanical equipment widely used in ships, but they are often damaged due to cavitation. In this paper, a Co-based coating was prepared on the surface of a substrate via laser cladding technology. The microstructure characteristics and phase composition of the coating were analyzed by an optical microscope (OM), a scanning electron microscope (SEM), and an x-ray diffractometer. Ultrasonic vibration cavitation tests were used to test the cavitation erosion resistance of the coating in NaCl solutions with different concentrations (0, 2.5, and 3.5 wt. %).The experimental results showed that the coating is mainly composed of γ-Co, (Co,W)6C, and Cr23C6. After 12 h of cavitation testing in different concentrations of NaCl solution, the Co-based coating exhibited better anti-cavitation performance than the 316 stainless steel substrate. The corrosion rate of the Co-based coating was significantly lower than that of the 316 stainless steel substrate. In addition, the experimental results also showed that the higher the concentration of NaCl, the faster the weight loss rate of the Co-based coating and the more pronounced the degree of surface cavitation. Although a dense oxide protective layer is easily formed on the surface of the Co-based coating and effectively inhibits the further erosion of the corrosive medium, with the increase in the concentration of NaCl solution, the erosion by chloride ions is more likely to destroy the dense protective layer and formed cavitation holes.

Zitieren

APA

Zhang, J., Xu, Q., Ding, Q., Duan, J., Xu, Y., & Ji, F. (2025). Microstructure characteristics and cavitation erosion resistance of Co-based coating fabricated via laser cladding. Journal of Laser Applications, 37(1). https://doi.org/10.2351/7.0001673

Vancouver

Zhang J, Xu Q, Ding Q, Duan J, Xu Y, Ji F. Microstructure characteristics and cavitation erosion resistance of Co-based coating fabricated via laser cladding. Journal of Laser Applications. 2025;37(1). doi:10.2351/7.0001673

BibTeX
@article{Zhang2025,
  author = {Zhang, Jie and Xu, Qing and Ding, Qiang and Duan, Jiawei and Xu, Yajing and Ji, Fengtao},
  title = {Microstructure characteristics and cavitation erosion resistance of Co-based coating fabricated via laser cladding},
  journal = {Journal of Laser Applications},
  year = {2025},
  volume = {37},
  number = {1},
  doi = {10.2351/7.0001673}
}
Kostenlos starten →