EUVIMEDEUVIMED entdecken
Crossref

Effects of surface roughness on the microstructure and mechanical properties of dissimilar sapphire/Invar36 alloy joints made by ultrashort pulsed laser micro-welding

Meng Yang, Qing Jiang, Xiang Zhang, Ming Wu, Tao Zhang, Rui Pan, Peng Li, Sumei Wang, Jin Yang

Journal of Laser Applications · 01.08.2024 · 36 (3)

DOI: 10.2351/7.0001513 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 26.07.2024. Verfasst von Meng Yang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shanghai Shuguang Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ultrashort pulsed (USP) laser microwelding of sapphire/lnvar36 alloy controlled by the surface roughness of metal was investigated for the first time. The surface roughness (Sa) of Invar alloys gradually decreased from 0.944 to 0.029 μm from the prime surface to grounded and polished surface. However, the joint shear strength first increased and then decreased with the lowered Sa, the maximum shear strength reached 107.87 MPa at the Sa ∼ 0.131 μm. Compared to other surfaces with low Sa, the relatively high surface roughness enhanced the interfacial thermal deposition both spatially and temporally which in turn promoted the diffusion of interface elements and the formation of jagged mechanical interlocking structures. Therefore, the appropriate rough metal surface was beneficial for the enhancement of sapphire/metal dissimilar joints. This report is of great significance in simplifying the surface preparation process in the USP laser microwelding of transparent hard and brittle materials with metals, therefore promoting this technique from lab to industry.

Förderung

  • National Natural Science Foundation of China
  • Shanghai Shuguang Program

Zitieren

APA

Yang, M., Jiang, Q., Zhang, X., Wu, M., Zhang, T., Pan, R., Li, P., Wang, S., & Yang, J. (2024). Effects of surface roughness on the microstructure and mechanical properties of dissimilar sapphire/Invar36 alloy joints made by ultrashort pulsed laser micro-welding. Journal of Laser Applications, 36(3). https://doi.org/10.2351/7.0001513

Vancouver

Yang M, Jiang Q, Zhang X, Wu M, Zhang T, Pan R, et al. Effects of surface roughness on the microstructure and mechanical properties of dissimilar sapphire/Invar36 alloy joints made by ultrashort pulsed laser micro-welding. Journal of Laser Applications. 2024;36(3). doi:10.2351/7.0001513

BibTeX
@article{Yang2024,
  author = {Yang, Meng and Jiang, Qing and Zhang, Xiang and Wu, Ming and Zhang, Tao and Pan, Rui and Li, Peng and Wang, Sumei and Yang, Jin},
  title = {Effects of surface roughness on the microstructure and mechanical properties of dissimilar sapphire/Invar36 alloy joints made by ultrashort pulsed laser micro-welding},
  journal = {Journal of Laser Applications},
  year = {2024},
  volume = {36},
  number = {3},
  doi = {10.2351/7.0001513}
}
Kostenlos starten →