Multi-peak Light-emitting Diode Curing Units and Polymerization of 3D-printed Crown and Bridge Resin
Operative Dentistry · 2024
DOI: 10.2341/23-061-l ↗Kurz gefasst
Fachartikel in der Zeitschrift Operative Dentistry, 2024. Verfasst von S H Chung und 4 weiteren Autor:innen. Beteiligte Einrichtung: Shin Hye Chung, DDS, MSD, PhD, Department of Dental Biomaterials Science, School of Dentistry and Dental Research Institute, Seoul National Universit…. Hauptthemen laut MEDLINE: Curing Lights, Dental, Crowns. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
Purpose
This study aimed to evaluate the substitutive and additive efficacy of multi-peak light-emitting diode (LED) curing units for post-curing of a three-dimensional- (3D-) printed crown and bridge resin.
Methods
A total of 792 disc- and 180 bar-shaped specimens were printed with a crown and bridge resin (NextDent C&B MFH) and post-cured using two LED curing units (VALO Cordless and Bluephase N G4) in fast and standard modes. Conventional post-curing (LC-3D Print Box, Group PC) was compared with LED-only curing (Groups V1, V2, B1, and B2) and LED-combined curing (Groups PV1, PV2, PB1, and PB2) in terms of microhardness, flexural strength, degree of conversion (DC), and CIE L*a*b* color and translucency parameters. Cytotoxicity of the resin eluates was evaluated using the WST-1 assay. Temperature increases on the resin surface were measured with infrared thermography. Data were statistically analyzed using ANOVA and Kruskal-Wallis tests (α=0.05).
Results
The microhardness and flexural strength in Groups V1, V2, B1, and DC in all LED-only groups were lower than in other groups (p
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Shin Hye Chung, DDS, MSD, PhD, Department of Dental Biomaterials Science, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea.
- En-Shi Jiang, DDS, MSD, PhD, Department of Stomatology, Yanbian University and Affiliated Hospital of Yanbian University, Yanji China.
- Bum-Soon Lim, PhD, Department of Dental Biomaterials Science, School of Dentistry and Dental Research Institute, Seoul National University, Seoul, Republic of Korea.
- Seong-Hae Kim, Center for Future Dentistry, Seoul National University, Seoul, Republic of Korea.
- *Juhea Chang, DDS, MSD, PhD, National Dental Care Center for Persons with Special Needs, Seoul National University Dental Hospital, Seoul, Republic of Korea.
Zitieren
APA
Chung, S. H., Jiang, E. S., Lim, B. S., Kim, S. H., & Chang, J. (2024). Multi-peak Light-emitting Diode Curing Units and Polymerization of 3D-printed Crown and Bridge Resin. Operative Dentistry. https://doi.org/10.2341/23-061-l
Vancouver
Chung SH, Jiang ES, Lim BS, Kim SH, Chang J. Multi-peak Light-emitting Diode Curing Units and Polymerization of 3D-printed Crown and Bridge Resin. Operative Dentistry. 2024. doi:10.2341/23-061-l
BibTeX
@article{Chung2024,
author = {Chung, S H and Jiang, E-S and Lim, B-S and Kim, S-H and Chang, J},
title = {Multi-peak Light-emitting Diode Curing Units and Polymerization of 3D-printed Crown and Bridge Resin},
journal = {Operative Dentistry},
year = {2024},
doi = {10.2341/23-061-l}
}
EUVIMED