EUVIMEDEUVIMED entdecken
Crossref

Marginal and Internal Gaps, Surface Roughness and Fracture Resistance of Provisional Crowns Fabricated With 3D Printing and Milling Systems

A Al-Wahadni, B O Abu Rashed, R Al-Fodeh, A Tabanjah, M Hatamleh

Operative Dentistry · 2023

DOI: 10.2341/22-095-l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Operative Dentistry, 2023. Verfasst von A Al-Wahadni und 4 weiteren Autor:innen. Beteiligte Einrichtung: *Ahed Al-Wahadni, BDS, MDSC, PhD, FFDRCSI, FDSRCPSG, Faculty of Dentistry, Jordan University of Science and Technology, Irbid, Jordan. Hauptthemen laut MEDLINE: Dental Prosthesis Design, Crowns. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 26 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose: To compare the marginal and internal gap, surface roughness, fracture resistance and mode of failure of provisional crowns fabricated with 3D printing and CAD/CAM manufacturing techniques. Methods and Materials: A maxillary first premolar was prepared for an all-ceramic crown and reproduced in cobalt-chromium metal dies (n=30) following CAD/CAM technology. The die was digitally scanned and exocad software was used to design the missing crown, which was manufactured using a CAM milling machine and two types of 3D printing machines (SLA and DLP) to produce 10 provisional crowns per group. The crowns were cemented to their respective dies and stored in water (24 hours; 37°C) followed by 600 thermal cycles (5°C/55°C) and 100,000 mechanical cycles (at 50N). Marginal and internal gap measurements were carried out using a 3D superimposition technique. Surface roughness (Ra) was determined using a profilometer at 0.5 mm/ second cross-head speed. The crowns were loaded to fracture at 0.5 mm/minute cross-head speed. Fracture forces and mode of failure were recorded, and data were analyzed using one-way analysis of variance (ANOVA) and multiple comparisons post hoc tests ( p

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental Prosthesis DesignCrownsDental PorcelainPrinting, Three-DimensionalComputer-Aided DesignDental Marginal Adaptation

Substanzen

Dental Porcelain

Autor:innen und Institutionen

  • *Ahed Al-Wahadni, BDS, MDSC, PhD, FFDRCSI, FDSRCPSG, Faculty of Dentistry, Jordan University of Science and Technology, Irbid, Jordan.
  • Baker Othman Abu Rashed, BDS, MDSc, Jordan University of Science and Technology, Irbid, Jordan.
  • Rami Al-Fodeh, BDS, FFDRCSI, DCh Dent, Jordan University of Science and Technology, Irbid, Jordan.
  • Abedlmalek Abu Tabanjah, BSDH, MDPH, Jordan University of Science and Technology, Irbid, Jordan.
  • Muhanad Hatamleh, BSc, MPhil, Dip, PhD, FADM, FAHCS, Luminus Technical University College, Amman, Jordan.

Zitieren

APA

Al-Wahadni, A., Abu Rashed, B. O., Al-Fodeh, R., Tabanjah, A., & Hatamleh, M. (2023). Marginal and Internal Gaps, Surface Roughness and Fracture Resistance of Provisional Crowns Fabricated With 3D Printing and Milling Systems. Operative Dentistry. https://doi.org/10.2341/22-095-l

Vancouver

Al-Wahadni A, Abu Rashed BO, Al-Fodeh R, Tabanjah A, Hatamleh M. Marginal and Internal Gaps, Surface Roughness and Fracture Resistance of Provisional Crowns Fabricated With 3D Printing and Milling Systems. Operative Dentistry. 2023. doi:10.2341/22-095-l

BibTeX
@article{AlWahadni2023,
  author = {Al-Wahadni, A and Abu Rashed, B O and Al-Fodeh, R and Tabanjah, A and Hatamleh, M},
  title = {Marginal and Internal Gaps, Surface Roughness and Fracture Resistance of Provisional Crowns Fabricated With 3D Printing and Milling Systems},
  journal = {Operative Dentistry},
  year = {2023},
  doi = {10.2341/22-095-l}
}
Kostenlos starten →