EUVIMEDEUVIMED entdecken
Crossref

Effects of Particle Abrasion Media and Pressure on Flexural Strength and Bond Strength of Zirconia

Y A Darkoue, J O Burgess, N Lawson, E McLaren, J E Lemons, G P Morris, D A Givan, C-C Fu

Operative Dentistry · 2023

DOI: 10.2341/20-168-l ↗

Kurz gefasst

Fachartikel in der Zeitschrift Operative Dentistry, 2023. Verfasst von Y A Darkoue und 7 weiteren Autor:innen. Beteiligte Einrichtung: *Yasko A Darkoue, BDS, MS, College of Dentistry, University of Illinois Chicago, Chicago, IL, USA. Hauptthemen laut MEDLINE: Flexural Strength, Dental Bonding. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To compare the effects of particle abrasion medium and pressure on shear bond strength and biaxial flexural strength of three generations of zirconia (Lava Frame, Lava Plus, and Lava Esthetic) with the goal of optimizing the bond to zirconia.

Methods

280 discs (14 mm diameter; 1 mm thickness) of each zirconia were milled and sintered. Specimens of each material were randomly distributed into 14 groups (n=20); half were tested for shear bond strength and half were tested for biaxial flexural strength. The specimens were particle abraded on one surface by 2 different media (50 μm alumina particles or 50 μm glass beads) for 10 seconds at three different pressures (15, 30, and 45 psi or 0.1, 0.2, 0.3 MPa). Untreated specimens served as positive control. A tube (1.50 mm diameter) filled with dual cured resin cement (Panavia SA) was placed onto the surface and light cured. Specimens were stored in water (37°C for 24 hours) and shear bond strength was measured in a universal testing machine (Instron). Biaxial flexural strength of each specimen was measured according to ISO 6872. Shear bond strength and biaxial flexural strength were compared individually with a 2-way analysis of variance (ANOVA) for factors surface treatment and zirconia composition.

Results

Significant differences were seen between surface treatments ( p

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Flexural StrengthDental BondingSurface PropertiesMaterials TestingZirconiumResin CementsShear StrengthAluminum OxideDental Stress Analysis

Substanzen

zirconium oxideZirconiumResin CementsAluminum Oxide

Autor:innen und Institutionen

  • *Yasko A Darkoue, BDS, MS, College of Dentistry, University of Illinois Chicago, Chicago, IL, USA.
  • John O Burgess, DDS, MS, Louisiana State University Health Sciences Center, New Orleans, LA, USA.
  • Nathaniel Lawson, DMD, MA, PhD, University of Alabama, School of Dentistry, Birmingham, AL, USA.
  • Edward McLaren, DDS, MDC, retired professor, University of California, Los Angeles, School of Dentistry, Los Angeles, CA, USA.
  • Jack E Lemons, MS, PhD, University of Alabama, School of Dentistry, Birmingham, AL, USA.
  • Geoffrey P Morris, MS, University of Alabama, School of Dentistry, Birmingham, AL, USA.

Zitieren

APA

Darkoue, Y. A., Burgess, J. O., Lawson, N., McLaren, E., Lemons, J. E., Morris, G. P., Givan, D. A., & Fu, C. C. (2023). Effects of Particle Abrasion Media and Pressure on Flexural Strength and Bond Strength of Zirconia. Operative Dentistry. https://doi.org/10.2341/20-168-l

Vancouver

Darkoue YA, Burgess JO, Lawson N, McLaren E, Lemons JE, Morris GP, et al. Effects of Particle Abrasion Media and Pressure on Flexural Strength and Bond Strength of Zirconia. Operative Dentistry. 2023. doi:10.2341/20-168-l

BibTeX
@article{Darkoue2023,
  author = {Darkoue, Y A and Burgess, J O and Lawson, N and McLaren, E and Lemons, J E and Morris, G P and Givan, D A and Fu, C-C},
  title = {Effects of Particle Abrasion Media and Pressure on Flexural Strength and Bond Strength of Zirconia},
  journal = {Operative Dentistry},
  year = {2023},
  doi = {10.2341/20-168-l}
}
Kostenlos starten →