EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the impact of aluminum heat sinks on passive cooling of photovoltaic panels

Lana Pantic, Marko Krstic, Stefan Djordjevic, Ivana Radonjic, Sasa Gocic, Branka Radovanovic, Veljko Begovic, Marko Mancic

Thermal Science · 2026 · (00) · 162-162

DOI: 10.2298/tsci260328162p ↗

Kurz gefasst

Fachartikel in der Zeitschrift Thermal Science, 2026. Verfasst von Lana Pantic und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As the temperature of photovoltaic panels rises, a drop in electrical conversion efficiency and output power is unavoidable. Therefore, a simple and low-cost cooling solution is needed - one that requires little or no maintenance and consumes no electricity. In this paper, we experimentally and numerically investigated passive cooling of photovoltaic panels using heat sinks of different geometries. Our experiments showed that these heat sinks reduce the average back-side temperature of the cooled panel by 13.6°C compared to a reference panel. They also increased the open-circuit voltage by 0.27 V relative to the reference. We also performed numerical simulations using Ansys Fluent 2025 R2. The simulated temperatures agreed well with the experimental data - the average difference was less than 1°C (approximately 1.9% relative difference). The simulations gave us a good insight into heat dissipation from the heat sinks. They revealed better cooling due to proper fin spacing, but also a limitation caused by the small contact area between the heat sink and the photovoltaic panel. These results confirm that passive cooling with aluminum heat sinks is a good method for improving photovoltaic panel performance, while the developed numerical model represents an accurate tool for heat sink design optimization.

Förderung

  • Ministry of Education, Science and Technological Development of the Republic of Serbia

Zitieren

APA

Pantic, L., Krstic, M., Djordjevic, S., Radonjic, I., Gocic, S., Radovanovic, B., Begovic, V., & Mancic, M. (2026). Investigating the impact of aluminum heat sinks on passive cooling of photovoltaic panels. Thermal Science, 162-162. https://doi.org/10.2298/tsci260328162p

Vancouver

Pantic L, Krstic M, Djordjevic S, Radonjic I, Gocic S, Radovanovic B, et al. Investigating the impact of aluminum heat sinks on passive cooling of photovoltaic panels. Thermal Science. 2026:162-162. doi:10.2298/tsci260328162p

BibTeX
@article{Pantic2026,
  author = {Pantic, Lana and Krstic, Marko and Djordjevic, Stefan and Radonjic, Ivana and Gocic, Sasa and Radovanovic, Branka and Begovic, Veljko and Mancic, Marko},
  title = {Investigating the impact of aluminum heat sinks on passive cooling of photovoltaic panels},
  journal = {Thermal Science},
  year = {2026},
  number = {00},
  pages = {162--162},
  doi = {10.2298/tsci260328162p}
}
Kostenlos starten →