EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Analysis of Material Efficiency and the Impact of Perforations on Heat Sinks for Monocrystalline Photovoltaic Panel Cooling

Raúl Cabrera-Escobar, José Cabrera-Escobar, David Vera, Francisco Jurado, Lenin Orozco-Cantos, Manolo Córdova-Suárez, Félix García-Mora

Energies · 04.11.2024 · 17 (21) · 5511

DOI: 10.3390/en17215511 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 04.11.2024. Verfasst von Raúl Cabrera-Escobar und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research, the design and simulation of a heat sink for photovoltaic panels were carried out using aluminum and copper, the most commonly used materials in heat dissipation systems. This heat sink consisted of fins that were tested both perforated and non-perforated to improve heat dissipation efficiency. This research stems from the need to reduce the temperature of photovoltaic panels during operation, as scientific evidence shows that photovoltaic panels experience a decrease in efficiency as the temperature increases, taking as a reference the temperature under standard test conditions. The simulations of photovoltaic panels with aluminum and copper fins, both perforated and non-perforated, followed a rigorous methodology. For validation, the simulation results were compared with field data, yielding a mean absolute percentage error of 1.71%. The findings indicate that copper fins reduced the temperature of the photovoltaic panel by 2.62 K, resulting in a 1.31% increase in efficiency. Similarly, aluminum fins reduced the temperature by 2.10 K, with a 1.05% increase in efficiency. Perforated copper fins achieved a temperature reduction of 3.07 K, increasing efficiency by 1.54%, while perforated aluminum fins reduced the temperature by 2.49 K, contributing to a 1.25% increase in efficiency.

Zitieren

APA

Cabrera-Escobar, R., Cabrera-Escobar, J., Vera, D., Jurado, F., Orozco-Cantos, L., Córdova-Suárez, M., & García-Mora, F. (2024). Comparative Analysis of Material Efficiency and the Impact of Perforations on Heat Sinks for Monocrystalline Photovoltaic Panel Cooling. Energies, 17(21), 5511. https://doi.org/10.3390/en17215511

Vancouver

Cabrera-Escobar R, Cabrera-Escobar J, Vera D, Jurado F, Orozco-Cantos L, Córdova-Suárez M, et al. Comparative Analysis of Material Efficiency and the Impact of Perforations on Heat Sinks for Monocrystalline Photovoltaic Panel Cooling. Energies. 2024;17(21):5511. doi:10.3390/en17215511

BibTeX
@article{CabreraEscobar2024,
  author = {Cabrera-Escobar, Raúl and Cabrera-Escobar, José and Vera, David and Jurado, Francisco and Orozco-Cantos, Lenin and Córdova-Suárez, Manolo and García-Mora, Félix},
  title = {Comparative Analysis of Material Efficiency and the Impact of Perforations on Heat Sinks for Monocrystalline Photovoltaic Panel Cooling},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5511},
  doi = {10.3390/en17215511}
}
Kostenlos starten →