Effect of sintering temperature and calcium amount on compressive strength of brushite-metakaolin polymer materials
Science of Sintering · 2022 · 54 (3) · 287-294
DOI: 10.2298/sos2203287d ↗Kurz gefasst
Fachartikel in der Zeitschrift Science of Sintering, 2022. Verfasst von Dunja Djukic und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.
Abstract (Originalsprache)
The effect of Ca2+ amount and sintering temperature on mechanical properties of geopolymer-brushite (GPB) binders was investigated. Brushite and raw abandoned kaolinite clay thermally transformed into metakaolin were used for GPB synthesis. The complete phase and structural analyses were performed by X-ray powder diffraction, and Fourier transforms infrared spectroscopy (FT-IR). The pore-filling effect as a consequence of Ca2+ ions incorporation into the hybrid geopolymer networks improved the compressive strength. On the other hand, the chosen biscuit sintering at 800 and 900oC caused the phase transformation of brushite into calcium pyrophosphate, which negatively affected the compressive strength of such materials. The obtained results indicate that the usage of relatively high sintering temperatures is not always the necessary step for producing geopolymer-based types of cement with prominent mechanical properties.
Förderung
- Ministry of Education, Science and Technological Development of the Republic of Serbia
Zitieren
APA
Djukic, D., Suljagic, M., Andjelkovic, L., Pavlovic, V., Bucevac, D., Vrbica, B., & Mirkovic, M. (2022). Effect of sintering temperature and calcium amount on compressive strength of brushite-metakaolin polymer materials. Science of Sintering, 54(3), 287-294. https://doi.org/10.2298/sos2203287d
Vancouver
Djukic D, Suljagic M, Andjelkovic L, Pavlovic V, Bucevac D, Vrbica B, et al. Effect of sintering temperature and calcium amount on compressive strength of brushite-metakaolin polymer materials. Science of Sintering. 2022;54(3):287-294. doi:10.2298/sos2203287d
BibTeX
@article{Djukic2022,
author = {Djukic, Dunja and Suljagic, Marija and Andjelkovic, Ljubica and Pavlovic, Vera and Bucevac, Dusan and Vrbica, Bosko and Mirkovic, Miljana},
title = {Effect of sintering temperature and calcium amount on compressive strength of brushite-metakaolin polymer materials},
journal = {Science of Sintering},
year = {2022},
volume = {54},
number = {3},
pages = {287--294},
doi = {10.2298/sos2203287d}
}
EUVIMED