EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Mechanical properties of phase-pure bulk Ta4AlC3 prepared by spark plasma sintering and subsequent heat treatment

Guobing Ying, Cong Hu, Lu Liu, Cheng Sun, Dong Wen, Jianfeng Zhang, Yongting Zheng, Minghui Wang, Chen Zhang, Xiang Wang, Cheng Wang

Processing and Application of Ceramics · 2021 · 15 (3) · 211-218

DOI: 10.2298/pac2103211y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processing and Application of Ceramics, 2021. Verfasst von Guobing Ying und 10 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-purity and bulk Ta4AlC3 ceramics were successfully fabricated by spark plasma sintering (SPS) and subsequent heat treatment, using the raw materials including TaC and Ta2AlC powders. These raw materials were first synthesized by self-propagation high temperature synthesis from elements tantalum, aluminium and carbon black powders, followed by pressure-less sintering. The as-fabricated bulk Ta4AlC3 was relatively stable when subjected to heat treatment at elevated temperature of 1500?C. Moreover, prolonging the heat treatment time resulted in bigger grain sizes and higher densities of the Ta4AlC3. The flexural strength and the fracture toughness of the Ta4AlC3 fabricated by SPS were found to be 411MPa and 7.11MPa?m1/2, respectively. After the heat treatment at 1500?C for 8 h, the flexural strength and the fracture toughness of the Ta4AlC3 could reach 709MPa and 9.23MPa?m1/2, respectively. The special structural characteristics of the ternary ceramics and the increase of density after the heat treatment are the main reasons for the variation in mechanical properties of ternary ceramics.

Zitieren

APA

Ying, G., Hu, C., Liu, L., Sun, C., Wen, D., Zhang, J., Zheng, Y., Wang, M., Zhang, C., Wang, X., & Wang, C. (2021). Mechanical properties of phase-pure bulk Ta4AlC3 prepared by spark plasma sintering and subsequent heat treatment. Processing and Application of Ceramics, 15(3), 211-218. https://doi.org/10.2298/pac2103211y

Vancouver

Ying G, Hu C, Liu L, Sun C, Wen D, Zhang J, et al. Mechanical properties of phase-pure bulk Ta4AlC3 prepared by spark plasma sintering and subsequent heat treatment. Processing and Application of Ceramics. 2021;15(3):211-218. doi:10.2298/pac2103211y

BibTeX
@article{Ying2021,
  author = {Ying, Guobing and Hu, Cong and Liu, Lu and Sun, Cheng and Wen, Dong and Zhang, Jianfeng and Zheng, Yongting and Wang, Minghui and Zhang, Chen and Wang, Xiang and Wang, Cheng},
  title = {Mechanical properties of phase-pure bulk Ta4AlC3 prepared by spark plasma sintering and subsequent heat treatment},
  journal = {Processing and Application of Ceramics},
  year = {2021},
  volume = {15},
  number = {3},
  pages = {211--218},
  doi = {10.2298/pac2103211y}
}
Kostenlos starten →