EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Effects of scanning speed on mechanical, wear property, and corrosion behavior of CP-Ti fabricated by the selective laser melting technique

Weimin Chen, Jinlong Hu, Zhuhao Wen, Haoqin Lin, Liying Sun, Qiang Zhang

Journal of Mining and Metallurgy, Section B: Metallurgy · 2026 · 62 (1) · 25-39

DOI: 10.2298/jmmb250903003c ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mining and Metallurgy, Section B: Metallurgy, 2026. Verfasst von Weimin Chen und 5 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, CP-Ti was prepared using the selective laser melting (SLM) technique to systematically investigate the effect of scanning speed on microstructure, mechanical properties, wear properties, and corrosion behavior. The optimum relative density of 99.87±0.12% was achieved at a scanning speed of 800 mm/s, with corresponding tensile strength, yield strength, elongation, and hardness values of 543±17 MPa, 453±7 MPa, 14±1%, and 294±4 HV, respectively. Additionally, SLMprocessed CP-Ti with optimum relative density exhibited the lowest wear rate (2.72×10-7 mm2/N) and excellent corrosion resistance. These results indicate that CP-Ti with high relative density, strength, and hardness, low wear rate, and excellent corrosion resistance can be fabricated by controlling the scanning speed, making it well-suited for biomedical implant applications.

Zitieren

APA

Chen, W., Hu, J., Wen, Z., Lin, H., Sun, L., & Zhang, Q. (2026). Effects of scanning speed on mechanical, wear property, and corrosion behavior of CP-Ti fabricated by the selective laser melting technique. Journal of Mining and Metallurgy, Section B: Metallurgy, 62(1), 25-39. https://doi.org/10.2298/jmmb250903003c

Vancouver

Chen W, Hu J, Wen Z, Lin H, Sun L, Zhang Q. Effects of scanning speed on mechanical, wear property, and corrosion behavior of CP-Ti fabricated by the selective laser melting technique. Journal of Mining and Metallurgy, Section B: Metallurgy. 2026;62(1):25-39. doi:10.2298/jmmb250903003c

BibTeX
@article{Chen2026,
  author = {Chen, Weimin and Hu, Jinlong and Wen, Zhuhao and Lin, Haoqin and Sun, Liying and Zhang, Qiang},
  title = {Effects of scanning speed on mechanical, wear property, and corrosion behavior of CP-Ti fabricated by the selective laser melting technique},
  journal = {Journal of Mining and Metallurgy, Section B: Metallurgy},
  year = {2026},
  volume = {62},
  number = {1},
  pages = {25--39},
  doi = {10.2298/jmmb250903003c}
}
Kostenlos starten →