Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles
Chemical Industry and Chemical Engineering Quarterly · 2015 · 21 (3) · 411-417
DOI: 10.2298/ciceq140228043t ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemical Industry and Chemical Engineering Quarterly, 2015. Verfasst von Natasa Tomovic und 4 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Education, Science and Technological Development of the Republic of Serbia.
Abstract (Originalsprache)
Hydrogel particles are often used as a carrier for immobilization of enzymes, polyphenolic antioxidants, whole microbial, plant or mammalian cells. In many processes, mechanical properties of alginate particles are essential due to their exposure to mechanical forces in production process. Determination and improvement of hydrogels mechanical properties is very important in prevention of the undesirable side effects during the manufacturing process and product application. The aim of this study was to define the mechanical properties of single particles submerged in water and in dry conditions using the compression method between two flat surfaces. The results indicated that the formulation of alginate beads and water loss during compression have significant influence on their mechanical behavior and stiffness. Calcium-alginate particles were produced using an electrostatic droplet extrusion technique, with an initial sodium alginate concentration of 1.5%w/v and calcium chloride (2.0% w/v) as gelling solution. The research findings were used to determine the influence of working conditions, sample deformation (10-50%) and different compression speeds (1-50mm/min) on mechanical strength of alginate beads. The Young?s modules and maximal forces for investigated deformation percentage of the alginate particles were determined from generated force-displacement and stress-strain curves during compression.
Förderung
- Ministry of Education, Science and Technological Development of the Republic of Serbia
Zitieren
APA
Tomovic, N., Trifkovic, K., Rakin, M., Rakin, M., & Bugarski, B. (2015). Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles. Chemical Industry and Chemical Engineering Quarterly, 21(3), 411-417. https://doi.org/10.2298/ciceq140228043t
Vancouver
Tomovic N, Trifkovic K, Rakin M, Rakin M, Bugarski B. Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles. Chemical Industry and Chemical Engineering Quarterly. 2015;21(3):411-417. doi:10.2298/ciceq140228043t
BibTeX
@article{Tomovic2015,
author = {Tomovic, Natasa and Trifkovic, Kata and Rakin, Marko and Rakin, Marica and Bugarski, Branko},
title = {Influence of compression speed and deformation percentage on mechanical properties of calcium alginate particles},
journal = {Chemical Industry and Chemical Engineering Quarterly},
year = {2015},
volume = {21},
number = {3},
pages = {411--417},
doi = {10.2298/ciceq140228043t}
}
EUVIMED