EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Alginate Properties and Calcium Chloride Concentration on Alginate Bead Reticulation and Size: A Phenomenological Approach

Chanez Bennacef, Stéphane Desobry iD, Jordane Jasniewski iD, Sébastien Leclerc iD, Laurent Probst, Sylvie Desobry-Banon iD

Polymers · 20.10.2023 · 15 (20) · 4163

DOI: 10.3390/polym15204163 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.10.2023. Verfasst von Chanez Bennacef und 5 weiteren Autor:innen. Beteiligte Einrichtung: Université de Lorraine, Laboratoire d'Ingénierie des Biomolécules (LIBio), ENSAIA, 54000 Nancy, France. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, Cookal Company, ANR Investissements d’Avenir.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two types of alginates, AlgLF and AlgP, were used in this study to produce alginate beads by electro-vibratory extrusion. AlgLF and AlgP exhibited different Mannuronate/Guluronate (M/G) ratios and molecular weights as measured by NMR and SEC-MALS. The calcium chloride concentration was found to have the greatest effect on bead size. Higher concentrations resulted in smaller beads. AlgLF with a higher molecular weight and a lower proportion of G blocks showed smaller beads. For both alginates, the bead size was also influenced by the flow rate and vibration frequency. Alginate solution aging showed a minimal effect. Alginate reticulation was modeled using a mathematical equation. The study provides insights for the optimization of alginate-based materials in different applications by shedding light on the main factors influencing bead size. The importance of the molecular weight, M/G ratio and calcium ion concentration in the gelling process is highlighted, providing opportunities for the tailoring of alginate materials through a phenomenological model.

Schlagwörter

Stichwörter der Autor:innen

M/G ratioalginatealginate bead sizeionic gelationmodelingmolecular weightphenomenological modelresponse surface method

Autor:innen und Institutionen

  • Université de Lorraine, Laboratoire d'Ingénierie des Biomolécules (LIBio), ENSAIA, 54000 Nancy, France.
  • Cookal Company, 19 Avenue de la Meurthe, 54320 Maxéville, France.
  • Université de Lorraine, CNRS, LEMTA, Faculty of Science and Technology, 54000 Nancy, France.

ORCID-Profile: Stéphane Desobry, Jordane Jasniewski, Sébastien Leclerc, Sylvie Desobry-Banon

Förderung

  • Agence Nationale de la Recherche
  • Cookal Company
  • ANR Investissements d’Avenir

Zitieren

APA

Bennacef, C., Desobry, S., Jasniewski, J., Leclerc, S., Probst, L., & Desobry-Banon, S. (2023). Influence of Alginate Properties and Calcium Chloride Concentration on Alginate Bead Reticulation and Size: A Phenomenological Approach. Polymers, 15(20), 4163. https://doi.org/10.3390/polym15204163

Vancouver

Bennacef C, Desobry S, Jasniewski J, Leclerc S, Probst L, Desobry-Banon S. Influence of Alginate Properties and Calcium Chloride Concentration on Alginate Bead Reticulation and Size: A Phenomenological Approach. Polymers. 2023;15(20):4163. doi:10.3390/polym15204163

BibTeX
@article{Bennacef2023,
  author = {Bennacef, Chanez and Desobry, Stéphane and Jasniewski, Jordane and Leclerc, Sébastien and Probst, Laurent and Desobry-Banon, Sylvie},
  title = {Influence of Alginate Properties and Calcium Chloride Concentration on Alginate Bead Reticulation and Size: A Phenomenological Approach},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {20},
  pages = {4163},
  doi = {10.3390/polym15204163}
}
Kostenlos starten →