EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Mortar Characterization of Granite Polishing Waste as a Partial Substitute for Cement

Andrés Felipe Múnera Yepes, Andrés Felipe Conejo López, Carlos F. Herrera, Alba Gallego Hernández

TecnoLógicas · 16.03.2026 · 29 (65) · e3482

DOI: 10.22430/22565337.3482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift TecnoLógicas, online erschienen am 16.03.2026. Verfasst von Andrés Felipe Múnera Yepes und 3 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0). Gefördert von: Universidad de Antioquia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydraulic cement is an essential construction material; however, it is associated with environmental pollution due to CO2 emissions generated during its production. Therefore, strategies to reduce cement use per cubic meter of mortar can help lower emissions. This study evaluated the effects of using granite polishing waste as a partial replacement for cement on the mechanical properties of mortars. The methodology involved preparing mixtures with cement replaced by granite polishing waste at 0%, 10%, 20%, 30%, 50%, 70%, and 80% by weight. The granite polishing waste had a moisture content of 47% and was used without any treatment or modification. The mixtures were tested in both fresh and hardened states, with flow measured per ASTM C1437-20 and compressive strength tested per ASTM C109/C109M-24. Additionally, petrographic analysis of each mixture was performed using optical microscopy on thin sections per ASTM C856/C856M-25 and electron microscopy techniques. Results showed that both flow and compressive strength decreased as the replacement level increased, with reductions of over 12% in flow and 33% in compressive strength after 20% replacement. Petrographic analysis indicated that significant cement replacements led to decreased adherence and increased voids. In conclusion, replacements of 20% or less have potential for non-structural applications. Using granite polishing waste as a partial cement replacement in mortars offers an alternative disposal method.

Förderung

  • Universidad de Antioquia

Zitieren

APA

Yepes, A. F. M., López, A. F. C., Herrera, C. F., & Hernández, A. G. (2026). Mortar Characterization of Granite Polishing Waste as a Partial Substitute for Cement. TecnoLógicas, 29(65), e3482. https://doi.org/10.22430/22565337.3482

Vancouver

Yepes AFM, López AFC, Herrera CF, Hernández AG. Mortar Characterization of Granite Polishing Waste as a Partial Substitute for Cement. TecnoLógicas. 2026;29(65):e3482. doi:10.22430/22565337.3482

BibTeX
@article{Yepes2026,
  author = {Yepes, Andrés Felipe Múnera and López, Andrés Felipe Conejo and Herrera, Carlos F. and Hernández, Alba Gallego},
  title = {Mortar Characterization of Granite Polishing Waste as a Partial Substitute for Cement},
  journal = {TecnoLógicas},
  year = {2026},
  volume = {29},
  number = {65},
  pages = {e3482},
  doi = {10.22430/22565337.3482}
}
Kostenlos starten →