EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Incorporation of Concrete Polishing Waste as a Partial Substitute for Cement in Mortar

Farjallah Alassaad iD, Houssam Affan iD, Bechara Haddad iD, Abdelrahman Mohamad, Nassim Sebaibi iD

Materials · 24.01.2025 · 18 (3) · 530

DOI: 10.3390/ma18030530 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.01.2025. Verfasst von Farjallah Alassaad und 4 weiteren Autor:innen. Beteiligte Einrichtung: CMEG, Z.A. de Cardonville, Rue Compagnie D, 14740 Thue et Mue, France. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines concrete polishing waste (CFPW) potential as a partial cement substitute in mortar formulation. Concrete polishing waste, a by-product of the grinding and polishing of concrete surfaces, is mainly composed of fine particles of silica and calcium carbonate. The aim of the research was to assess this industry waste incorporation impact on various mortar properties. Four mixes containing different percentages of CFPW were tested for their physic-mechanical properties and environmental impact. The results show that increasing the CFPW percentage leads to higher porosity and shrinkage, as well as lower mechanical strength and density. However, a significant reduction in CO2 emissions was observed with CFPW incorporation (up to 29% reduction for 30% CPFW). Although CFPW use presents technical challenges, it offers an interesting opportunity to reduce mortars’ carbon footprint. The study concludes that moderate CFPW use can offer a balance between environmental benefits and performance, highlighting the need to optimize formulations to maximize benefits while minimizing compromises on mechanical properties.

Schlagwörter

Stichwörter der Autor:innen

carbon footprintcement substitutionconcrete polishing wasteenvironmental sustainability

Autor:innen und Institutionen

  • CMEG, Z.A. de Cardonville, Rue Compagnie D, 14740 Thue et Mue, France.
  • Groupe Vivialys, 37 Rue de Molsheim, 67000 Strasbourg, France.
  • Builders Lab, Builders Ecole d'ingénieurs, COMUE Normandie Université, 1 Rue Pierre et Marie Curie, 14610 Epron, France.
  • Vicat, 4 Rue Aristide Berges, 38080 L'Isle-d'Abeau, France.

ORCID-Profile: Farjallah Alassaad, Houssam Affan, Bechara Haddad, Nassim Sebaibi

Zitieren

APA

Alassaad, F., Affan, H., Haddad, B., Mohamad, A., & Sebaibi, N. (2025). Incorporation of Concrete Polishing Waste as a Partial Substitute for Cement in Mortar. Materials, 18(3), 530. https://doi.org/10.3390/ma18030530

Vancouver

Alassaad F, Affan H, Haddad B, Mohamad A, Sebaibi N. Incorporation of Concrete Polishing Waste as a Partial Substitute for Cement in Mortar. Materials. 2025;18(3):530. doi:10.3390/ma18030530

BibTeX
@article{Alassaad2025,
  author = {Alassaad, Farjallah and Affan, Houssam and Haddad, Bechara and Mohamad, Abdelrahman and Sebaibi, Nassim},
  title = {Incorporation of Concrete Polishing Waste as a Partial Substitute for Cement in Mortar},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {3},
  pages = {530},
  doi = {10.3390/ma18030530}
}
Kostenlos starten →