EUVIMEDEUVIMED entdecken
Systematische Übersicht

Physical–mechanical properties and accuracy of additively manufactured resin denture bases: Impact of printing orientation

Ahmed Yaseen Alqutaibi, Rola Aljohani, Sarah Almuzaini, Mohammed Ahmed Alghauli

Journal of Prosthodontic Research · 2025

DOI: 10.2186/jpr.jpr_d_24_00263 ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift Journal of Prosthodontic Research, 2025. Verfasst von Ahmed Yaseen Alqutaibi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Substitutive Dental Science Department, College of Dentistry, Taibah University, Al-Madinah, Saudi Arabia. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Denture Bases, Resins, Synthetic, Dental Materials. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: This systematic review evaluated the effect of different printing orientations on the physical-mechanical properties and accuracy of resin denture bases and related specimens. STUDY SELECTION: Utilizing PRISMA 2020 guidelines, a comprehensive search of PubMed, Web of Science, Cochrane, and Scopus databases was conducted until June 2024. Included studies examined the accuracy, volumetric changes, and mechanical or physical properties of 3D-printed denture bases in various orientations. Studies without relevant data were excluded. Bias risk was assessed using a modified CONSORT checklist. RESULTS: This review included 24 studies on 3D-printed denture base resins, mainly based on stereolithography and digital light processing. Horizontal orientation (0°) generally enhanced flexural strength, while tilted and vertical orientations (90°) reduced it. Microhardness results varied due to differences in materials, layer thicknesses, and post-curing. Surface roughness was highest at 45°. Vertical orientation uses less material but is less time-efficient. Microbial adhesion, influenced by surface roughness, varied with printing orientation without a clear consensus on the optimal direction. CONCLUSIONS: Printing orientation significantly impacts the physical and mechanical properties and accuracy of 3D-printed resin dentures. A horizontal orientation (0°) improved flexural strength, while accuracy and adaptability were better at 45° and 90°. Surface roughness, translucency, and chemical stability are also affected by orientation, post-curing, and material choice. Although a 90° orientation reduces material use, it increases printing time. Standardized study designs are recommended for drawing definitive conclusions in future research.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalDenture BasesResins, SyntheticDental MaterialsMechanical PhenomenaSurface PropertiesHumansFlexural StrengthMaterials TestingHardness

Stichwörter der Autor:innen

3D printingBuild-up anglesDenture basePrinting directionsStereolithography

Substanzen

Resins, SyntheticDental Materials

Autor:innen und Institutionen

  • Substitutive Dental Science Department, College of Dentistry, Taibah University, Al-Madinah, Saudi Arabia.
  • Prosthodontics Department, College of Dentistry, Ibb University, Ibb, Yemen.
  • College of Dentistry, Taibah University, Al-Madinah, Saudia Arabia.
  • College of Dentistry, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia.
  • Department of Prosthodontics, Faculty of Dentistry, Ibb University, Ibb, Yemen.

Zitieren

APA

Alqutaibi, A. Y., Aljohani, R., Almuzaini, S., & Alghauli, M. A. (2025). Physical–mechanical properties and accuracy of additively manufactured resin denture bases: Impact of printing orientation. Journal of Prosthodontic Research. https://doi.org/10.2186/jpr.jpr_d_24_00263

Vancouver

Alqutaibi AY, Aljohani R, Almuzaini S, Alghauli MA. Physical–mechanical properties and accuracy of additively manufactured resin denture bases: Impact of printing orientation. Journal of Prosthodontic Research. 2025. doi:10.2186/jpr.jpr_d_24_00263

BibTeX
@article{Alqutaibi2025,
  author = {Alqutaibi, Ahmed Yaseen and Aljohani, Rola and Almuzaini, Sarah and Alghauli, Mohammed Ahmed},
  title = {Physical–mechanical properties and accuracy of additively manufactured resin denture bases: Impact of printing orientation},
  journal = {Journal of Prosthodontic Research},
  year = {2025},
  doi = {10.2186/jpr.jpr_d_24_00263}
}
Kostenlos starten →