EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Magnetic fly-ash geopolymer for heavy metal removal in aqueous solutions

Guyu Shi, Baozhi Cui, Say Kee Ong iD, Kejin Wang

Water Science & Technology · 15.06.2025 · 91 (12) · 1330-1344

DOI: 10.2166/wst.2025.077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Water Science & Technology, online erschienen am 04.06.2025. Verfasst von Guyu Shi und 3 weiteren Autor:innen. Beteiligte Einrichtung: R&D Department, Shanghai Lanke Environmental Technology Co., Ltd, Shanghai 201803, China. Hauptthemen laut MEDLINE: Metals, Heavy, Water Pollutants, Chemical, Coal Ash, Water Purification. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Novel magnetic geopolymers were manufactured by synthesizing magnetic Fe3O4 particles on the surface of prepared geopolymer (Method 1) or by incorporating pre-synthesized magnetic Fe3O4 particles into the geopolymer during the manufacture of the geopolymer (Method 2). This study evaluated the effect of the incorporated magnetic Fe3O4 on the geopolymer magnetic, physical, and adsorption properties and its separation in aqueous solutions. Based on several preliminary measurements on the synthesized magnetic geopolymers, Method 2 was found to be a better method for producing magnetic geopolymer. Magnetic geopolymer synthesized by Method 2 exhibited ferromagnetic properties comparable to that of magnetic Fe3O4, with a saturation magnetization of 8 emu·g−1 and an intrinsic coercivity of 265 Oe. The magnetic geopolymer was efficiently separated from an aqueous solution within 2 min using a 0.48-T magnetic field. In addition, the magnetic geopolymer has a maximum copper adsorption capacity of 111.1 mg·g−1, which was similar to the non-magnetic reference geopolymer indicating that the addition of magnetic Fe3O4 did not compromise the geopolymer adsorption capacity. The magnetic geopolymer is a promising material with good adsorption and separation properties that can be used for heavy metals removal and recovery in wastewater and metals separation in industrial processes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Metals, HeavyWater Pollutants, ChemicalCoal AshWater PurificationPolymersAdsorptionSolutions

Stichwörter der Autor:innen

fly ashgeopolymermagnetizationmetals adsorptionparticle separation

Substanzen

Metals, HeavyWater Pollutants, ChemicalCoal AshSolutionsPolymers

Autor:innen und Institutionen

  • R&D Department, Shanghai Lanke Environmental Technology Co., Ltd, Shanghai 201803, China.
  • Department of Civil, Construction, and Environmental Engineering, Iowa State University, Ames, Iowa 50011, USA.
  • Division of Critical Materials, Ames National Laboratory, US Department of Energy, Critical Materials Institute, Ames, IA 50011, USA.
  • Department of Civil, Construction, and Environmental Engineering, Iowa State University, Ames, Iowa 50011, USA E-mail: skong@iastate.edu.

ORCID-Profile: Say Kee Ong

Zitieren

APA

Shi, G., Cui, B., Ong, S. K., & Wang, K. (2025). Magnetic fly-ash geopolymer for heavy metal removal in aqueous solutions. Water Science & Technology, 91(12), 1330-1344. https://doi.org/10.2166/wst.2025.077

Vancouver

Shi G, Cui B, Ong SK, Wang K. Magnetic fly-ash geopolymer for heavy metal removal in aqueous solutions. Water Science & Technology. 2025;91(12):1330-1344. doi:10.2166/wst.2025.077

BibTeX
@article{Shi2025,
  author = {Shi, Guyu and Cui, Baozhi and Ong, Say Kee and Wang, Kejin},
  title = {Magnetic fly-ash geopolymer for heavy metal removal in aqueous solutions},
  journal = {Water Science & Technology},
  year = {2025},
  volume = {91},
  number = {12},
  pages = {1330--1344},
  doi = {10.2166/wst.2025.077}
}
Kostenlos starten →