EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Computational probe of current responses derived from mass-transport through interconnected pore structures in 3D-printed milli fluidic devices with channel band electrodes

Jesús Eduardo Contreras Naranjo, Arly Darío Rincón Quintero Rincon Quintero, Camilo Leonardo Sandoval Rodríguez Sandoval Rodríguez, Mauricio Andrés Ruiz Ochoa Ruiz Ochoa, Omar Lengerke Lengerke, Germán Andrés Bautista Obregón Bautista Obregón

Periodicals of Engineering and Natural Sciences (PEN) · 29.04.2026 · 14 (2) · 103-114

DOI: 10.21533/pen.v14.i2.1885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Periodicals of Engineering and Natural Sciences (PEN), online erschienen am 29.04.2026. Verfasst von Jesús Eduardo Contreras Naranjo und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This computational study investigates steady-state current responses in Fused Deposition Modeling (FDM) 3D-printed milli fluidic devices with channel band electrodes under laminar flow conditions. While conventional microfluidic devices are well-characterized using Levich and Thin Layer analytical models, 3D-printed platforms exhibit inherent porosity creating complex current behavior inadequately described by Levich and Thin Layer equations alone. After a mesh convergence study determined appropriate mesh conditions, four device designs considering porous network structure and pore proximity to the electrode were computationally probed. Analysis of these simulations incorporated design and hydrodynamic dimensionless parameters to characterize mass-transport regimes. Previously reported General and Transition analytical models as well as Levich and Thin Layer models were applied for current prediction and mass-transport analysis. As a result, the highest and lowest currents were obtained for a pore continuous to the electrode and a complex pore network structure, respectively. Velocity and concentration profiles reveal that interconnected pore structures and pore – electrode proximity create regions where diffusion, convection, or both transport regimes predominate simultaneously in the same device configuration. While general and transition mass-transport models accurately characterize designs with simpler porous network structures, they diverge under the structural mass-transport constraints of a design with a more complex porous network structure; this identifies critical limitations for existing theory and underscores the need for future framework refinements. Progress in this direction is essential to optimize device design and improve analytical performance in electrochemical sensing applications that employ FDM 3D-printed milli fluidic devices.

Zitieren

APA

Naranjo, J. E. C., Quintero, A. D. R. Q. R., Rodríguez, C. L. S. R. S., Ochoa, M. A. R. O. R., Lengerke, O. L., & Obregón, G. A. B. O. B. (2026). Computational probe of current responses derived from mass-transport through interconnected pore structures in 3D-printed milli fluidic devices with channel band electrodes. Periodicals of Engineering and Natural Sciences (PEN), 14(2), 103-114. https://doi.org/10.21533/pen.v14.i2.1885

Vancouver

Naranjo JEC, Quintero ADRQR, Rodríguez CLSRS, Ochoa MAROR, Lengerke OL, Obregón GABOB. Computational probe of current responses derived from mass-transport through interconnected pore structures in 3D-printed milli fluidic devices with channel band electrodes. Periodicals of Engineering and Natural Sciences (PEN). 2026;14(2):103-114. doi:10.21533/pen.v14.i2.1885

BibTeX
@article{Naranjo2026,
  author = {Naranjo, Jesús Eduardo Contreras and Quintero, Arly Darío Rincón Quintero Rincon and Rodríguez, Camilo Leonardo Sandoval Rodríguez Sandoval and Ochoa, Mauricio Andrés Ruiz Ochoa Ruiz and Lengerke, Omar Lengerke and Obregón, Germán Andrés Bautista Obregón Bautista},
  title = {Computational probe of current responses derived from mass-transport through interconnected pore structures in 3D-printed milli fluidic devices with channel band electrodes},
  journal = {Periodicals of Engineering and Natural Sciences (PEN)},
  year = {2026},
  volume = {14},
  number = {2},
  pages = {103--114},
  doi = {10.21533/pen.v14.i2.1885}
}
Kostenlos starten →