A Physics-Guided Workflow for Quantitative Casing-Damage Evaluation Using Low-Frequency Pulse-Echo Measurements
SPE Journal · 01.11.2026 · 1-19
DOI: 10.2118/237006-pa ↗Kurz gefasst
Fachartikel in der Zeitschrift SPE Journal, online erschienen am 18.11.2026. Verfasst von Jia He und 8 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.
Abstract (Originalsprache)
Conventional low-frequency pulse-echo ultrasonic tools provide amplitude, transit-time, and resonance-frequency measurements for casing screening, but traditional interpretation does not convert the full waveform into reproducible, quantitative damage metrics. The waveform contains superimposed inner-wall reflection, defect scattering, and thickness resonance, while pressure- and temperature-induced changes in drilling-fluid properties and transducer response can mask damage-related signatures. We develop a physics-guided workflow that converts standard 250-kHz pulse-echo data into three quantitative indicators: maximum wall-thickness loss, metal-loss ratio, and severe-wall-loss ratio. Finite-element simulations and controlled laboratory measurements link waveform features to wall-loss geometry and define three response regimes—separable, overlap-dominated, and below the reliable sizing limit—each with a dedicated processing strategy. High-pressure/high-temperature (HP/HT) calibration provides correction factors for drilling-fluid acoustic velocity, amplitude attenuation, and transducer sensitivity. When validated on 20 casing specimens with known defect geometries, the workflow achieved mean absolute errors of 2.77, 0.14, and 0.06 percentage points for maximum wall-thickness loss, metal-loss ratio, and severe-wall-loss ratio, respectively. Application to a perforated interval in field data shows depth localization consistent with the expected damage zone. Because no coregistered point-by-point reference geometry was available, the field case evaluates localization and output behavior rather than absolute sizing accuracy. Although the numerical coefficients are system-specific, the workflow architecture and simulation-and-experiment calibration strategy are transferable to other pulse-echo tools.
Zitieren
APA
He, J., Wang, H., Wu, W., Li, W., Yi, S., Hou, Z., Zhao, J., Xie, J., & Hou, Y. (2026). A Physics-Guided Workflow for Quantitative Casing-Damage Evaluation Using Low-Frequency Pulse-Echo Measurements. SPE Journal, 1-19. https://doi.org/10.2118/237006-pa
Vancouver
He J, Wang H, Wu W, Li W, Yi S, Hou Z, et al. A Physics-Guided Workflow for Quantitative Casing-Damage Evaluation Using Low-Frequency Pulse-Echo Measurements. SPE Journal. 2026:1-19. doi:10.2118/237006-pa
BibTeX
@article{He2026,
author = {He, Jia and Wang, Hua and Wu, Wenhe and Li, Wanying and Yi, Shaoqi and Hou, Zhenyong and Zhao, Jie and Xie, Jialu and Hou, Yujia},
title = {A Physics-Guided Workflow for Quantitative Casing-Damage Evaluation Using Low-Frequency Pulse-Echo Measurements},
journal = {SPE Journal},
year = {2026},
pages = {1--19},
doi = {10.2118/237006-pa}
}
EUVIMED