Directional damage detection through unidirectional FSAT in pulse-echo mode
Structural Health Monitoring · 03.07.2026
DOI: 10.1177/14759217261456985 ↗Kurz gefasst
Fachartikel in der Zeitschrift Structural Health Monitoring, online erschienen am 03.07.2026. Verfasst von Octavio A. Márquez Reyes und 4 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Wirtschaft und Energie.
Abstract (Originalsprache)
This work presents an experimental investigation of a stand alone directional structural health monitoring (SHM) system based on a frequency-steerable acoustic transducer (FSAT) operating in pulse–echo mode. A single transducer bonded at the center of a 1000 × 1000 × 1 mm aluminum plate was used to perform damage detection and localization by exploiting the frequency-dependent beam steering characteristics of the FSAT. Directional scanning of the surrounding structure was achieved without mechanical movement or phased-array electronics. Damage detection employed baseline comparison using a root mean square metric applied to reflected Lamb wave signals. Both directional detection at fixed actuation frequencies and spatial scanning via frequency sweeps were experimentally demonstrated. The system successfully detected and localized multiple damage types, including drilled holes and attached disk masses with a diameter of 10 mm, with characteristic dimensions as small as 3 mm. Progressive detection and discrimination of single, double, and triple damage scenarios at distinct angular locations validated the FSAT’s capability for complex multidamage monitoring. The localization accuracy was consistent with the transducer’s angle–frequency calibration, and time-of-flight measurements provided the radial distance estimation capabilities. Compared to conventional omnidirectional sensor networks or phased-array systems, the presented solution offers reduced system complexity, lower sensor density, and improved scalability, while remaining compatible with existing ultrasonic sensor networks. These results demonstrate the potential of the FSAT for simpler, lighter, and more scalable autonomous SHM systems, with enhanced inspection flexibility and localization accuracy suitable for industrial applications.
Förderung
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Wirtschaft und Energie
Zitieren
APA
Reyes, O. A. M., Moll, J., Kraemer, P., Mohammadgholiha, M., & Marchi, L. D. (2026). Directional damage detection through unidirectional FSAT in pulse-echo mode. Structural Health Monitoring. https://doi.org/10.1177/14759217261456985
Vancouver
Reyes OAM, Moll J, Kraemer P, Mohammadgholiha M, Marchi LD. Directional damage detection through unidirectional FSAT in pulse-echo mode. Structural Health Monitoring. 2026. doi:10.1177/14759217261456985
BibTeX
@article{Reyes2026,
author = {Reyes, Octavio A. Márquez and Moll, Jochen and Kraemer, Peter and Mohammadgholiha, Masoud and Marchi, Luca De},
title = {Directional damage detection through unidirectional FSAT in pulse-echo mode},
journal = {Structural Health Monitoring},
year = {2026},
doi = {10.1177/14759217261456985}
}
EUVIMED