EUVIMEDEUVIMED entdecken
Crossref

The Role of Rock-Chip Removals and Cutting-Area Shapes in Polycrystalline-Diamond-Compact-Bit Design Optimization

Shilin Chen, Greg Grosz, Seth Anderle, Rob Arfele, Keshan Xun

SPE Drilling & Completion · 04.01.2016 · 30 (04) · 334-347

DOI: 10.2118/171833-pa ↗

Kurz gefasst

Fachartikel in der Zeitschrift SPE Drilling & Completion, online erschienen am 17.11.2015. Verfasst von Shilin Chen und 4 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Almost all previous cutter-force models assumed that cutting force was proportional to cutting area. Cutting-area-based single-cutter-force models were extensively used in polycrystalline-diamond-compact (PDC) -bit design optimization. This paper explains why cutting-area-based bit models failed to predict bit forces. A new cutter force model and a new bit model were developed and are discussed in the paper. In the new cutter force model, cutting force is a function of the shape of the cutting area. A common force model is developed for three types of cutting shapes. In the new bit model, 3D rock chips created in front of cutting face are modeled, meshed, and removed from the hole bottom by updating the hole bottom at each timestep. To validate the new model, four different PDC bits were designed, manufactured, and laboratory-tested under controlled conditions. Details from laboratory testing and field-test results are presented.

Zitieren

APA

Chen, S., Grosz, G., Anderle, S., Arfele, R., & Xun, K. (2016). The Role of Rock-Chip Removals and Cutting-Area Shapes in Polycrystalline-Diamond-Compact-Bit Design Optimization. SPE Drilling & Completion, 30(04), 334-347. https://doi.org/10.2118/171833-pa

Vancouver

Chen S, Grosz G, Anderle S, Arfele R, Xun K. The Role of Rock-Chip Removals and Cutting-Area Shapes in Polycrystalline-Diamond-Compact-Bit Design Optimization. SPE Drilling & Completion. 2016;30(04):334-347. doi:10.2118/171833-pa

BibTeX
@article{Chen2016,
  author = {Chen, Shilin and Grosz, Greg and Anderle, Seth and Arfele, Rob and Xun, Keshan},
  title = {The Role of Rock-Chip Removals and Cutting-Area Shapes in Polycrystalline-Diamond-Compact-Bit Design Optimization},
  journal = {SPE Drilling & Completion},
  year = {2016},
  volume = {30},
  number = {04},
  pages = {334--347},
  doi = {10.2118/171833-pa}
}
Kostenlos starten →