Polycrystalline Diamond Composite Bit Technology for Sustainable Work
Processes · 05.02.2025 · 13 (2) · 421
DOI: 10.3390/pr13020421 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 05.02.2025. Verfasst von Xiaoao Liu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: open fund project of the State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (Southwest Petroleum University), Nanchong City-Southwest Petroleum University City School Science and Technology Strategic Cooperation Project.
Abstract (Originalsprache)
Reducing the auxiliary drilling time and improving the drilling efficiency are not only important technical means to enhance the development and deep exploration of oil and gas reserves, but also have significant implications for ensuring energy security. Bottom hole self-renewal drill bit technology is a new technology that does not require the retrieval of drills from the well bottom, instead directly updating worn drill bits in place. Through the self-renewing structure of the drill bit, the sustainability of the drill bit can be increased. Conducting research on this technology is expected to overcome the technical issues related to the short useable life of drill bits, thus promoting single-trip drilling technology. This article summarizes the scientific progress made by researchers in self-renewal Polycrystalline Diamond Composite (PDC) drill bit technology; for example, the American National Oilwell Varco (NOV) company has developed a mobile self-renewal cone bit technology and introduced the structural characteristics and working principles of three types of rotating self-renewal drill bits: rack-driven, worm-driven, and ratchet-driven. This study compares and analyzes the advantages and disadvantages of these three rotary types of PDC drill bits, providing a detailed introduction to the working principles and modes of the triggering, transmission, limit and locking, and renewal structure devices of the drill bit. Relevant suggestions are proposed for the development of bottom hole self-renewal PDC drill bit technology; namely, strengthening research efforts relating to the intelligent judgment and recognition of cutting tooth wear of the drill bit, as well as the integration of multiple technologies. The sustainability of these novel bits can provide technical support for the development of single-trip drilling technology for deep formations, improve the service life of bits in deep formations that are difficult to drill, and contribute to the efficient development of deep-sea energy resources worldwide.
Förderung
- open fund project of the State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (Southwest Petroleum University)
- Nanchong City-Southwest Petroleum University City School Science and Technology Strategic Cooperation Project
Zitieren
APA
Liu, X., Ji, G., Yang, L., Ren, H., Wu, Q., Yu, J., & Huang, K. (2025). Polycrystalline Diamond Composite Bit Technology for Sustainable Work. Processes, 13(2), 421. https://doi.org/10.3390/pr13020421
Vancouver
Liu X, Ji G, Yang L, Ren H, Wu Q, Yu J, et al. Polycrystalline Diamond Composite Bit Technology for Sustainable Work. Processes. 2025;13(2):421. doi:10.3390/pr13020421
BibTeX
@article{Liu2025,
author = {Liu, Xiaoao and Ji, Guodong and Yang, Liyuan and Ren, Haitao and Wu, Qiang and Yu, Jinping and Huang, Kuilin},
title = {Polycrystalline Diamond Composite Bit Technology for Sustainable Work},
journal = {Processes},
year = {2025},
volume = {13},
number = {2},
pages = {421},
doi = {10.3390/pr13020421}
}
EUVIMED