EUVIMEDEUVIMED entdecken
Crossref

Simplifying the Orientation of S1 Iliosacral Screws for Placement in the Dysmorphic Sacrum

Hongmin Cai iD, Yingchao Yin iD, Ruipeng Zhang iD, Lin Liu iD, Tao Wang, Zhiyong Hou iD

Journal of Bone and Joint Surgery · 2025

DOI: 10.2106/jbjs.23.01416 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Bone and Joint Surgery, 2025. Verfasst von Hongmin Cai und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Surgery, Third Hospital of Hebei Medical University, Shijiazhuang, Hebei Province, People's Republic of China. Hauptthemen laut MEDLINE: Sacrum, Bone Screws, Ilium. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Determining the proper iliosacral screw orientation in a dysmorphic S1 sacral segment using a C-arm is difficult, and pelvic computed tomography (CT) is often necessary for the preoperative planning. On the preoperative pelvic axial CT section, the intended screw trajectory can be delineated intraosseously along the axis of the oblique osseous corridor. An inherently accurate orientation would be determined by 2 factors: (1) the trajectory is in the pelvic transverse plane, and (2) it is oriented relative to the coronal plane at a patient-specific angle, which should be measured preoperatively. Based on the above reasoning, we aimed to simplify and verify the orientation.

Methods

After establishing the starting point on the sacral lateral view, we tested a method of simplifying the guidewire orientation: placing the guidewire in the pelvic transverse plane and then manipulating it to be angled relative to the coronal plane at the preoperatively measured patient-specific angle. The guidewire orientation should then be reproducibly accurate on the pelvic outlet and inlet views. The feasibility and safety of our method were verified through computer-simulated virtual surgical procedures in 95 dysmorphic sacra and clinical surgical procedures in 12 patients. The primary outcome parameters were the guidewire orientation and screw placement accuracy.

Results

Using our method, the S1 guidewire orientation was reproducibly accurate on the pelvic outlet and inlet views in all of the virtual and clinical surgical procedures. Ninety-five virtual S1 screws (1 screw in each left hemipelvis) were placed intraosseously in the pelvic transverse plane. Fourteen unilateral S1 screws were placed intraosseously in the pelvic transverse plane in the 12 patients (2 patients had double screws) without iatrogenic injuries.

Conclusions

The guidewire orientation can be simplified by placing the guidewire in the pelvic transverse plane and replicating the preoperatively measured patient-specific angle between the guidewire and the coronal plane. After establishing the starting point on the sacral lateral view, our simplified manipulation yields a reproducibly accurate orientation on the pelvic outlet and inlet views. Level of Evidence: Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SacrumBone ScrewsIliumHumansMaleFemaleAdultTomography, X-Ray ComputedMiddle AgedAdolescentYoung Adult

Autor:innen und Institutionen

  • Department of Orthopaedic Surgery, Third Hospital of Hebei Medical University, Shijiazhuang, Hebei Province, People's Republic of China.

ORCID-Profile: Hongmin Cai, Yingchao Yin, Ruipeng Zhang, Lin Liu, Zhiyong Hou

Zitieren

APA

Cai, H., Yin, Y., Zhang, R., Liu, L., Wang, T., & Hou, Z. (2025). Simplifying the Orientation of S1 Iliosacral Screws for Placement in the Dysmorphic Sacrum. Journal of Bone and Joint Surgery. https://doi.org/10.2106/jbjs.23.01416

Vancouver

Cai H, Yin Y, Zhang R, Liu L, Wang T, Hou Z. Simplifying the Orientation of S1 Iliosacral Screws for Placement in the Dysmorphic Sacrum. Journal of Bone and Joint Surgery. 2025. doi:10.2106/jbjs.23.01416

BibTeX
@article{Cai2025,
  author = {Cai, Hongmin and Yin, Yingchao and Zhang, Ruipeng and Liu, Lin and Wang, Tao and Hou, Zhiyong},
  title = {Simplifying the Orientation of S1 Iliosacral Screws for Placement in the Dysmorphic Sacrum},
  journal = {Journal of Bone and Joint Surgery},
  year = {2025},
  doi = {10.2106/jbjs.23.01416}
}
Kostenlos starten →