Investigating Iosipescu shear properties of laser powder bed fusion 316L stainless steel via digital image correlation technique
Challenge Journal of Structural Mechanics · 15.03.2026 · 12 (1) · 45
DOI: 10.20528/cjsmec.2026.01.004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Challenge Journal of Structural Mechanics, online erschienen am 15.03.2026. Verfasst von Elanur Çelebi Kavdır und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Laser Powder Bed Fusion (LPBF) has been widely adopted for producing stainless steel 316L components with complex geometries; however, despite extensive research on its tensile performance, the shear behavior of LPBF 316L remains insufficiently characterized. Reliable shear properties are crucial for structural components operating under multiaxial loading, yet experimental data enabling accurate calibration of multiaxial yield and failure models are still scarce. In this study, the tensile and shear responses of LPBF 316L were systematically investigated through standard uniaxial tensile testing and Iosipescu shear testing, supported by full-field Digital Image Correlation (DIC). All specimens were fabricated using LPBF system, and their build orientations were precisely documented to account for anisotropy effects. Tensile tests yielded an ultimate tensile strength of approximately 650 MPa and an average elastic modulus of 197 ± 32 GPa. Iosipescu shear tests demonstrated a maximum shear stress of 621 MPa, revealing a notably close relationship between shear strength and tensile strength. The experimentally measured shear modulus was also consistent with the tensile-derived value through classical elastic relations. The combined results deepen our understanding of LPBF 316L mechanical behavior, especially the coupling between tensile and shear responses. The findings further highlight the importance of integrating shear data into design procedures, multiaxial stress assessments, and material databases for additively manufactured stainless steels. Overall, this study provides a robust experimental foundation for improving structural integrity assessments and advancing the design of LPBF 316L components subjected to complex loading.
Zitieren
APA
Kavdır, E. Ç., Kaya, G., & Polat, Y. (2026). Investigating Iosipescu shear properties of laser powder bed fusion 316L stainless steel via digital image correlation technique. Challenge Journal of Structural Mechanics, 12(1), 45. https://doi.org/10.20528/cjsmec.2026.01.004
Vancouver
Kavdır EÇ, Kaya G, Polat Y. Investigating Iosipescu shear properties of laser powder bed fusion 316L stainless steel via digital image correlation technique. Challenge Journal of Structural Mechanics. 2026;12(1):45. doi:10.20528/cjsmec.2026.01.004
BibTeX
@article{Kavdr2026,
author = {Kavdır, Elanur Çelebi and Kaya, Gürkan and Polat, Yusuf},
title = {Investigating Iosipescu shear properties of laser powder bed fusion 316L stainless steel via digital image correlation technique},
journal = {Challenge Journal of Structural Mechanics},
year = {2026},
volume = {12},
number = {1},
pages = {45},
doi = {10.20528/cjsmec.2026.01.004}
}
EUVIMED