EUVIMEDEUVIMED entdecken
Crossref

Micro-Computed Tomography Analysis of Fit of Ceramic Inlays Produced with Different CAD Software Programs

A Bayrak, B Akat, M Ocak, M A Kιlιçarslan, M Özcan

European Journal of Prosthodontics and Restorative Dentistr · 01.09.2021 · 29 (3) · 160

DOI: 10.1922/ejprd_2046bayrak06 ↗

Kurz gefasst

Fachartikel in der Zeitschrift European Journal of Prosthodontics and Restorative Dentistr, online erschienen am 01.09.2021. Verfasst von A Bayrak und 4 weiteren Autor:innen. Beteiligte Einrichtung: Ankara University, Faculty of Dentistry, Department of Prosthodontics, Ankara, Turkey. Hauptthemen laut MEDLINE: Dental Marginal Adaptation, Inlays.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

The aim of this study was to evaluate marginal and internal fit of ceramic inlays designed with different computer-aided design software programs. Materials and Methods: 11 typodont mandibular first molars were prepared as a ceramic class II mesioocclusal inlay cavity. Teeth were scanned using 3Shape TRIOS Intraoral Dental Scanner. The scan data, which was obtained in the form of a STL file, was designed in three different CAD systems (CEREC, KaVo, and Planmeca). The obtained STL scan data was exported to design inlay using three different CAD systems (CEREC, KaVo, and Planmeca). An independent 5-axis milling unit was used to manufacture the feldspatic inlay restorations. 11 measurements for each teeth were made by using micro-ct to evaluate the marginal and internal fit. One-way ANOVA was used to determine the statistical difference between groups, and Tukey posthoc test was used to determine intra-group differences.

Results

According to repeated ANOVA test results, a statistically significant difference was found between the groups for the variables A, D, and F. There was no statistically significant difference between the groups in linear measurements for other measurement points and volumetric measurements (p>0.05).

Conclusion

Software programs of different systems affects the marginal and internal fit of inlay restorations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental Marginal AdaptationInlaysCeramicsComputer-Aided DesignDental PorcelainDental Prosthesis DesignSoftwareX-Ray Microtomography

Stichwörter der Autor:innen

Computer-Aided DesignInlay RestorationsInternal FitMarginal FitMicro-Computed Tomography

Substanzen

Dental Porcelain

Autor:innen und Institutionen

  • Ankara University, Faculty of Dentistry, Department of Prosthodontics, Ankara, Turkey.
  • Ankara University, Faculty of Dentistry, Department of Anatomy, Ankara, Turkey.
  • University of Zürich, Division of Dental Biomaterials, Center for Dental and Oral Medicine, Clinic for Reconstructive Dentistry, Zürich, Switzerland.

Zitieren

APA

Bayrak, A., Akat, B., Ocak, M., Kιlιçarslan, M. A., & Özcan, M. (2021). Micro-Computed Tomography Analysis of Fit of Ceramic Inlays Produced with Different CAD Software Programs. European Journal of Prosthodontics and Restorative Dentistr, 29(3), 160. https://doi.org/10.1922/ejprd_2046bayrak06

Vancouver

Bayrak A, Akat B, Ocak M, Kιlιçarslan MA, Özcan M. Micro-Computed Tomography Analysis of Fit of Ceramic Inlays Produced with Different CAD Software Programs. European Journal of Prosthodontics and Restorative Dentistr. 2021;29(3):160. doi:10.1922/ejprd_2046bayrak06

BibTeX
@article{Bayrak2021,
  author = {Bayrak, A and Akat, B and Ocak, M and Kιlιçarslan, M A and Özcan, M},
  title = {Micro-Computed Tomography Analysis of Fit of Ceramic Inlays Produced with Different CAD Software Programs},
  journal = {European Journal of Prosthodontics and Restorative Dentistr},
  year = {2021},
  volume = {29},
  number = {3},
  pages = {160},
  doi = {10.1922/ejprd_2046bayrak06}
}
Kostenlos starten →