EUVIMEDSkopri EUVIMED
Open access

The influence of polishing techniques on pre-polymerized CAD\CAM acrylic resin denture bases

Manal Rahma Alammari

Electronic Physician · 2017-10-25 · 9 (10) · 5452-5458

DOI: 10.19082/5452 ↗

At a glance

Journal article in Electronic Physician, published online on 2017-10-25. Written by Manal Rahma Alammari. Institution: Associate Professor, Department of Oral and Maxillofacial Prosthodontics, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia. Cited 35 times so far (Crossref). The full text is freely available in PubMed Central.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

BACKGROUND: Lately, computer-aided design and computer-aided manufacturing (CAD/CAM) has broadly been successfully employed in dentistry. The CAD/CAM systems have recently become commercially available for fabrication of complete dentures, and are considered as an alternative technique to conventionally processed acrylic resin bases. However, they have not yet been fully investigated. OBJECTIVE: The purpose of this study was to inspect the effects of mechanical polishing and chemical polishing on the surface roughness (Ra) and contact angle (wettability) of heat-cured, auto-cured and CAD/CAM denture base acrylic resins. METHODS: This study was conducted at the Advanced Dental Research Laboratory Center of King Abdulaziz University from March to June 2017. Three denture base materials were selected: heat cure poly-methylmethacrylate resin, thermoplastic (polyamide resin) and (CAD\CAM) denture base resin. Sixty specimens were prepared and divided into three groups, twenty in each. Each group was divided according to the polishing techniques into (Mech P) and (Chem P), ten specimens in each; surface roughness and wettability were investigated. Data were analyzed by SPSS version 22, using one-way ANOVA and Pearson coefficient. RESULTS: One-way analysis of variance (ANOVA) and post hoc tests were used for comparing the surface roughness values between three groups which revealed a statistical significant difference between them (p1

Subjects

Author keywords

Acrylic denture baseCAD\CAM acrylic resinPolishingSurface roughnessWettability

Authors and institutions

  • Associate Professor, Department of Oral and Maxillofacial Prosthodontics, King Abdulaziz University, Jeddah, Kingdom of Saudi Arabia.

Cite

APA

Alammari, M. R. (2017). The influence of polishing techniques on pre-polymerized CAD\CAM acrylic resin denture bases. Electronic Physician, 9(10), 5452-5458. https://doi.org/10.19082/5452

Vancouver

Alammari MR. The influence of polishing techniques on pre-polymerized CAD\CAM acrylic resin denture bases. Electronic Physician. 2017;9(10):5452-5458. doi:10.19082/5452

BibTeX
@article{Alammari2017,
  author = {Alammari, Manal Rahma},
  title = {The influence of polishing techniques on pre-polymerized CAD\CAM acrylic resin denture bases},
  journal = {Electronic Physician},
  year = {2017},
  volume = {9},
  number = {10},
  pages = {5452--5458},
  doi = {10.19082/5452}
}
Start for free →