Enhanced thermal conductivity and phase change performance of paraffin-based materials using nanostructured additives for thermal energy storage applications
Clean Energy Science and Technology · 04.03.2026
DOI: 10.18686/cest637 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clean Energy Science and Technology, online erschienen am 04.03.2026. Verfasst von Hayder M. Ali und 6 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Phase-change materials (PCMs) provide high-density Solar Thermal Energy Storage (STES) for solar applications but suffer from low thermal conductivity, excessive subcooling, and cycling degradation. This study systematically compares five nanostructure classes—graphene nanoplatelets (GNP), multi-walled carbon nanotubes (MWCNT), metallic nanoparticles (Cu, Ag), and metal oxides (Al₂O₃, TiO₂)—incorporated into paraffin and sodium nitrate PCMs to address these limitations. Nanostructures were characterized using XRD, FTIR, BET, SEM, and TEM to establish morphology-performance relationships. BET surface area (320.5 m2/g for GNPs, 265.4 m2/g for MWCNTs) correlated strongly with thermal conductivity enhancement (R2 = 0.87, p < 0.001), confirming that high-aspect-ratio structures enable percolation network formation. At 3 wt% loading—identified as the optimal concentration through percolation analysis—carbon-based composites achieved 150% (GNPs) and 131% (MWCNTs) conductivity gains at 25 ℃. DSC analysis revealed 60% subcooling suppression with GNPs, reducing crystallization lag from 5.5 ℃ to 2.2 ℃ through heterogeneous nucleation. Charging-discharging experiments verified 30–34% reductions in thermal response time, with temperature uniformity improving by 67%. Statistical analysis using one-way ANOVA with Tukey's HSD test (p < 0.05) confirmed significant performance hierarchies: carbon-based > metallic > metal oxides across all metrics. Extended cycling tests (1000 melt-freeze cycles) validated superior durability, with carbon-enhanced paraffin and oxide-enhanced sodium nitrate retaining >93% of their latent heat capacity, compared with
Zitieren
APA
Ali, H. M., Sengan, S., Papasani, A., Smerat, A., Shojonov, M., Madaminov, B., & Sundareswaran, V. (2026). Enhanced thermal conductivity and phase change performance of paraffin-based materials using nanostructured additives for thermal energy storage applications. Clean Energy Science and Technology. https://doi.org/10.18686/cest637
Vancouver
Ali HM, Sengan S, Papasani A, Smerat A, Shojonov M, Madaminov B, et al. Enhanced thermal conductivity and phase change performance of paraffin-based materials using nanostructured additives for thermal energy storage applications. Clean Energy Science and Technology. 2026. doi:10.18686/cest637
BibTeX
@article{Ali2026,
author = {Ali, Hayder M. and Sengan, Sudhakar and Papasani, Anusha and Smerat, Aseel and Shojonov, Muzaffar and Madaminov, Bekzod and Sundareswaran, Veena},
title = {Enhanced thermal conductivity and phase change performance of paraffin-based materials using nanostructured additives for thermal energy storage applications},
journal = {Clean Energy Science and Technology},
year = {2026},
doi = {10.18686/cest637}
}
EUVIMED