Flexible Polyolefin Elastomer/Paraffin Wax/Alumina/Graphene Nanoplatelets Phase Change Materials with Enhanced Thermal Conductivity and Mechanical Performance for Solar Conversion and Thermal Energy Storage Applications
Polymers · 29.01.2024 · 16 (3) · 362
DOI: 10.3390/polym16030362 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.01.2024. Verfasst von Jie Tian und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Shaanxi University of Technology, Hanzhong 723099, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Project of Basic Research Programme of Shaanxi Provincial Department of Education.
Abstract (Originalsprache)
In this study, electrically insulating polyolefin elastomer (POE)-based phase change materials (PCMs) comprising alumina (Al2O3) and graphene nanoplatelets (GNPs) are prepared using a conventional injection moulding technique, which exhibits promising applications for solar energy storage due to the reduced interfacial thermal resistance, excellent stability, and proficient photo-thermal conversion efficiency. A synergistic interplay between Al2O3 and GNPs is observed, which facilitates the establishment of thermally conductive pathways within the POE/paraffin wax (POE/PW) matrix. The in-plane thermal conductivity of POE/PW/GNPs 5 wt%/Al2O3 40 wt% composite reaches as high as 1.82 W m−1K−1, marking a remarkable increase of ≈269.5% when compared with that of its unfilled POE/PW counterpart. The composite exhibits exceptional heat dissipation capabilities, which is critical for thermal management applications in electronics. Moreover, POE/PW/GNPs/Al2O3 composites demonstrate outstanding electrical insulation, enhanced mechanical performance, and efficient solar energy conversion and transportation. Under 80 mW cm−2 NIR light irradiation, the temperature of the POE/PW/GNPs 5 wt%/Al2O3 40 wt% composite reaches approximately 65 °C, a notable 20 °C improvement when compared with the POE/PW blend. The pragmatic and uncomplicated preparation method, coupled with the stellar performance of the composites, opens a promising avenue and broader possibility for developing flexible PCMs for solar conversion and thermal storage applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil Engineering and Architecture, Shaanxi University of Technology, Hanzhong 723099, China.
- National and Local Engineering Laboratory for Slag Comprehensive Utilization and Environment Technology, School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong 723099, China.
- College of Polymer Science and Engineering, Sichuan University, Chengdu 610065, China.
Förderung
- Project of Basic Research Programme of Shaanxi Provincial Department of Education
Zitieren
APA
Tian, J., Wang, C., Wang, K., Xue, R., Liu, X., & Yang, Q. (2024). Flexible Polyolefin Elastomer/Paraffin Wax/Alumina/Graphene Nanoplatelets Phase Change Materials with Enhanced Thermal Conductivity and Mechanical Performance for Solar Conversion and Thermal Energy Storage Applications. Polymers, 16(3), 362. https://doi.org/10.3390/polym16030362
Vancouver
Tian J, Wang C, Wang K, Xue R, Liu X, Yang Q. Flexible Polyolefin Elastomer/Paraffin Wax/Alumina/Graphene Nanoplatelets Phase Change Materials with Enhanced Thermal Conductivity and Mechanical Performance for Solar Conversion and Thermal Energy Storage Applications. Polymers. 2024;16(3):362. doi:10.3390/polym16030362
BibTeX
@article{Tian2024,
author = {Tian, Jie and Wang, Chouxuan and Wang, Kaiyuan and Xue, Rong and Liu, Xinyue and Yang, Qi},
title = {Flexible Polyolefin Elastomer/Paraffin Wax/Alumina/Graphene Nanoplatelets Phase Change Materials with Enhanced Thermal Conductivity and Mechanical Performance for Solar Conversion and Thermal Energy Storage Applications},
journal = {Polymers},
year = {2024},
volume = {16},
number = {3},
pages = {362},
doi = {10.3390/polym16030362}
}
EUVIMED