EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure

Xiulei Wang, Yan Zha, Pengcheng Xie, Weimin Yang

Clean Energy Science and Technology · 2025-09-30 · 3 (3) · 447

DOI: 10.18686/cest447 ↗

At a glance

Journal article in Clean Energy Science and Technology, published online on 2025-09-30. Written by Xiulei Wang and 3 co-authors. Cited 2 times so far (Crossref); 45 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The plastic liner is critical in Type IV hydrogen storage tanks due to its lightweight and hydrogen anti-embrittlement properties. However, hydrogen permeation from free volume and accumulation at the liner-composite interface can cause buckling under inappropriate rapid discharge. Existing studies focus on evaluating buckling under the assumption of its inevitability, examining parameters such as Thickness-to-diameter ratio and discharge rate, but neglect the underlying permeation-structure interaction and lack a systematic design approach for minimizing liner thickness. This work introduces a novel theoretical framework to determine the minimum wall thickness that prevents buckling under any discharge condition by coupling material permeability, structural parameters, and service pressure. The method allows early safety validation via material-level testing, reducing the need for extensive cycle type tests. Furthermore, a large-capacity hydrogen storage vessel is taken as an example, and representative experimental data are analyzed. This research provides a foundational design tool enhancing reliability, cutting development cost, and supporting standard optimization for high-pressure hydrogen vessels.

Cite

APA

Wang, X., Zha, Y., Xie, P., & Yang, W. (2025). Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure. Clean Energy Science and Technology, 3(3), 447. https://doi.org/10.18686/cest447

Vancouver

Wang X, Zha Y, Xie P, Yang W. Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure. Clean Energy Science and Technology. 2025;3(3):447. doi:10.18686/cest447

BibTeX
@article{Wang2025,
  author = {Wang, Xiulei and Zha, Yan and Xie, Pengcheng and Yang, Weimin},
  title = {Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure},
  journal = {Clean Energy Science and Technology},
  year = {2025},
  volume = {3},
  number = {3},
  pages = {447},
  doi = {10.18686/cest447}
}
Start for free →