Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure
Clean Energy Science and Technology · 30.09.2025 · 3 (3) · 447
DOI: 10.18686/cest447 ↗Kurz gefasst
Fachartikel in der Zeitschrift Clean Energy Science and Technology, online erschienen am 30.09.2025. Verfasst von Xiulei Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The plastic liner is critical in Type IV hydrogen storage tanks due to its lightweight and hydrogen anti-embrittlement properties. However, hydrogen permeation from free volume and accumulation at the liner-composite interface can cause buckling under inappropriate rapid discharge. Existing studies focus on evaluating buckling under the assumption of its inevitability, examining parameters such as Thickness-to-diameter ratio and discharge rate, but neglect the underlying permeation-structure interaction and lack a systematic design approach for minimizing liner thickness. This work introduces a novel theoretical framework to determine the minimum wall thickness that prevents buckling under any discharge condition by coupling material permeability, structural parameters, and service pressure. The method allows early safety validation via material-level testing, reducing the need for extensive cycle type tests. Furthermore, a large-capacity hydrogen storage vessel is taken as an example, and representative experimental data are analyzed. This research provides a foundational design tool enhancing reliability, cutting development cost, and supporting standard optimization for high-pressure hydrogen vessels.
Zitieren
APA
Wang, X., Zha, Y., Xie, P., & Yang, W. (2025). Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure. Clean Energy Science and Technology, 3(3), 447. https://doi.org/10.18686/cest447
Vancouver
Wang X, Zha Y, Xie P, Yang W. Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure. Clean Energy Science and Technology. 2025;3(3):447. doi:10.18686/cest447
BibTeX
@article{Wang2025,
author = {Wang, Xiulei and Zha, Yan and Xie, Pengcheng and Yang, Weimin},
title = {Supplementary theoretical design framework for Type IV hydrogen storage vessel liners: A minimum wall thickness addressing discharge buckling failure},
journal = {Clean Energy Science and Technology},
year = {2025},
volume = {3},
number = {3},
pages = {447},
doi = {10.18686/cest447}
}
EUVIMED