EUVIMEDEUVIMED entdecken
Crossref

Application of X-Ray Fluorescence Analysis of Drill Cuttings for Geosteering Horizontal Wells: A Case Study of the Achimov Formation (Part 1)

L. A. Uspenskaya, N. A. Schadchnev, V. K. Vinogradov, P. V. Bybin, A. S. Butkeev, A. G. Manikin, K. V. Andryukhin

Georesursy · 08.10.2026 · 28 (3) · 82-96

DOI: 10.18599/grs.2026.3.13 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Georesursy, online erschienen am 08.10.2026. Verfasst von L. A. Uspenskaya und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents a methodology for the rapid interpretation of X-ray fluorescence (XRF) data from drill cuttings, taking into account the lithogeochemical characteristics of the Achimov Formation deposits of the Urengoy oil and gas condensate field (Russia). Based on a comprehensive analysis of core and cuttings material, geochemical indicators were established that allow reservoirs and non-reservoirs, represented by clay-rich and dense carbonate-cemented intervals, to be distinguished. The chemical composition characteristics of genetically distinct clay types – upper, intraformational, and basal clays – were determined. These clay types exhibit similar geophysical characteristics according to the data from the full logging-while-drilling suite. The possibility of identifying clay types from XRF data of drill cuttings was demonstrated, enabling the rapid determination of the well position relative to the productive interval and informed adjustment of the well trajectory. Geochemical indicators were also established to distinguish natural dense carbonate-cemented intervals from carbonate contamination introduced into the cuttings from the drilling fluid in the form of marble chips. The results demonstrate the effectiveness of enhanced drill cuttings analysis in the Achimov Formation deposits of the Urengoy field for reducing non-productive drilling during horizontal well construction, both with a full and a minimal logging-whiledrilling suite.

Zitieren

APA

Uspenskaya, L. A., Schadchnev, N. A., Vinogradov, V. K., Bybin, P. V., Butkeev, A. S., Manikin, A. G., & Andryukhin, K. V. (2026). Application of X-Ray Fluorescence Analysis of Drill Cuttings for Geosteering Horizontal Wells: A Case Study of the Achimov Formation (Part 1). Georesursy, 28(3), 82-96. https://doi.org/10.18599/grs.2026.3.13

Vancouver

Uspenskaya LA, Schadchnev NA, Vinogradov VK, Bybin PV, Butkeev AS, Manikin AG, et al. Application of X-Ray Fluorescence Analysis of Drill Cuttings for Geosteering Horizontal Wells: A Case Study of the Achimov Formation (Part 1). Georesursy. 2026;28(3):82-96. doi:10.18599/grs.2026.3.13

BibTeX
@article{Uspenskaya2026,
  author = {Uspenskaya, L. A. and Schadchnev, N. A. and Vinogradov, V. K. and Bybin, P. V. and Butkeev, A. S. and Manikin, A. G. and Andryukhin, K. V.},
  title = {Application of X-Ray Fluorescence Analysis of Drill Cuttings for Geosteering Horizontal Wells: A Case Study of the Achimov Formation (Part 1)},
  journal = {Georesursy},
  year = {2026},
  volume = {28},
  number = {3},
  pages = {82--96},
  doi = {10.18599/grs.2026.3.13}
}
Kostenlos starten →