EUVIMEDEUVIMED entdecken
Crossref

Determining the Optimum Cutting Tool Geometry for Machining Al 7075 Alloy: A Statistical Approach

Hasan Boz, Ömer Seçgin, İbrahim Özsert

Muş Alparslan Üniversitesi Fen Bilimleri Dergisi · 27.06.2026 · 14 (1) · 106-113

DOI: 10.18586/msufbd.1886552 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Muş Alparslan Üniversitesi Fen Bilimleri Dergisi, online erschienen am 27.06.2026. Verfasst von Hasan Boz und 2 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: Chair of the Scientific Research Projects (BAP) Commission at Sakarya University of Applied Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of tool geometry and cutting parameters on cutting forces in milling Al 7075 alloy, which is frequently preferred in the aerospace and automotive industries due to its high strength-to-weight ratio. Three-flute carbide end mills were specially manufactured with varying combinations of clearance angle (8°, 10°, 12°) and rake angle (14°, 18°, 22°). The experimental process used a Taguchi L9 orthogonal array with clearance angle, rake angle, and cutting speed (70, 85, 100 m/min) as control factors. Variance analysis (ANOVA) showed that cutting speed had the largest contribution ratio (40%) to cutting forces, with results serving as exploratory trend indicators. Signal-to-Noise (S/N) analysis identified 8° clearance angle, 18° rake angle, and 100 m/min cutting speed as the optimum combination for minimum cutting force. The lowest resultant cutting force measured was 469.72 N. The findings indicate that combining a small rake angle with a high cutting speed reduces cutting resistance and improves machining efficiency.

Förderung

  • Chair of the Scientific Research Projects (BAP) Commission at Sakarya University of Applied Sciences

Zitieren

APA

Boz, H., Seçgin, Ö., & Özsert, İ. (2026). Determining the Optimum Cutting Tool Geometry for Machining Al 7075 Alloy: A Statistical Approach. Muş Alparslan Üniversitesi Fen Bilimleri Dergisi, 14(1), 106-113. https://doi.org/10.18586/msufbd.1886552

Vancouver

Boz H, Seçgin Ö, Özsert İ. Determining the Optimum Cutting Tool Geometry for Machining Al 7075 Alloy: A Statistical Approach. Muş Alparslan Üniversitesi Fen Bilimleri Dergisi. 2026;14(1):106-113. doi:10.18586/msufbd.1886552

BibTeX
@article{Boz2026,
  author = {Boz, Hasan and Seçgin, Ömer and Özsert, İbrahim},
  title = {Determining the Optimum Cutting Tool Geometry for Machining Al 7075 Alloy: A Statistical Approach},
  journal = {Muş Alparslan Üniversitesi Fen Bilimleri Dergisi},
  year = {2026},
  volume = {14},
  number = {1},
  pages = {106--113},
  doi = {10.18586/msufbd.1886552}
}
Kostenlos starten →