Influence of the folded balloon geometry on the Crimping process of Stents
Revista Brasileira de Ciência, Tecnologia e Inovação · 2019
DOI: 10.18554/rbcti.v4i1.3412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Revista Brasileira de Ciência, Tecnologia e Inovação, 2019. Verfasst von Tobias Anderson Guimarães und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
Nowadays, the use of stents during the angioplasty process is a common practice for the artery restenosis. Usually, the structural integrity of the balloon and stent are studied based on the numerical simulation using the finite elements method. In most cases, the geometry of the balloon is considered as a cylinder with thickness constant. However, the balloon is folded before the angioplasty. In this context, the objective of this work is to study the influence of the stress caused by the crimping process in the structural integrity of the stent and the balloon. For the simulation of the crimping process, the geometry of the expandable balloon was considered as a cylinder with folds. This geometry was considered in order to model the balloon without internal pressure before the deployment of the stent. The results have proved that the folded balloon stress distribution caused by the crimping process should be take account in the analysis of the structural integrity of the stent and balloon.
Zitieren
APA
Guimarães, T. A., Araújo, R., & Oliveira, S. A. G. (2019). Influence of the folded balloon geometry on the Crimping process of Stents. Revista Brasileira de Ciência, Tecnologia e Inovação. https://doi.org/10.18554/rbcti.v4i1.3412
Vancouver
Guimarães TA, Araújo R, Oliveira SAG. Influence of the folded balloon geometry on the Crimping process of Stents. Revista Brasileira de Ciência, Tecnologia e Inovação. 2019. doi:10.18554/rbcti.v4i1.3412
BibTeX
@article{Guimares2019,
author = {Guimarães, Tobias Anderson and Araújo, Rogério and Oliveira, Sônia Aparecida Goulart},
title = {Influence of the folded balloon geometry on the Crimping process of Stents},
journal = {Revista Brasileira de Ciência, Tecnologia e Inovação},
year = {2019},
doi = {10.18554/rbcti.v4i1.3412}
}
EUVIMED