EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Buckling Analysis of Thin Titanium Alloy Plates Using the Finite Element Method

Riyam Basim Al-Tameemi, Khulood Ibrahim Dawood, Thaer Abdulwahhab Shihab, Hussein Kadhim Sharaf

International Journal on Advanced Science, Engineering and Information Technology · 26.06.2026 · 16 (3) · 967-973

DOI: 10.18517/ijaseit.16.3.13957 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal on Advanced Science, Engineering and Information Technology, online erschienen am 26.06.2026. Verfasst von Riyam Basim Al-Tameemi und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, an analysis of thin titanium alloy plates using the fem has been conducted accordingly. The axial compressive loading condition was also used for stability analysis, employing a rectangular Ti-6Al-4V titanium alloy plate measuring 300 × 200 × 2 mm. The material properties used in the simulation were Young's modulus of 110 GPa and Poisson's ratio of 0.34, with a yield strength of about 880 MPa. A full finite element analysis was carried out to determine the critical buckling load and mode shapes of the plate. From this analysis, we find that the first critical buckling load is about 18.6 kN, while the plate's maximum displacement is mostly localized on an area very near its center. To observe the effect of plate thickness on the critical buckling load, the titanium plate was subjected to different boundary conditions, but with the same material properties. The results showed that plate thickness had a significant impact on structural resistance to buckling. This is due to the high bending stiffness of thicker plates, which prevents them from buckling for a longer period when subjected to axial forces. When the thickness was increased from 1.5 mm to 3 mm, the critical buckling load increased by more than twofold. The stress distribution was also seen to be concentrated only along the locked edges. The study indicates that the finite element method (FEM) is a powerful analytical tool widely used to predict the buckling behavior of such structures, providing valuable input for the design and optimization of lightweight titanium alloy parts.

Zitieren

APA

Al-Tameemi, R. B., Dawood, K. I., Shihab, T. A., & Sharaf, H. K. (2026). Structural Buckling Analysis of Thin Titanium Alloy Plates Using the Finite Element Method. International Journal on Advanced Science, Engineering and Information Technology, 16(3), 967-973. https://doi.org/10.18517/ijaseit.16.3.13957

Vancouver

Al-Tameemi RB, Dawood KI, Shihab TA, Sharaf HK. Structural Buckling Analysis of Thin Titanium Alloy Plates Using the Finite Element Method. International Journal on Advanced Science, Engineering and Information Technology. 2026;16(3):967-973. doi:10.18517/ijaseit.16.3.13957

BibTeX
@article{AlTameemi2026,
  author = {Al-Tameemi, Riyam Basim and Dawood, Khulood Ibrahim and Shihab, Thaer Abdulwahhab and Sharaf, Hussein Kadhim},
  title = {Structural Buckling Analysis of Thin Titanium Alloy Plates Using the Finite Element Method},
  journal = {International Journal on Advanced Science, Engineering and Information Technology},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {967--973},
  doi = {10.18517/ijaseit.16.3.13957}
}
Kostenlos starten →