EUVIMEDOpdag EUVIMED
Crossref

Investigation of Supercritical Fluid Processing for Nonvolatile Resistive Random Access Memory Devices Based on SrBi4Ti4O15 Ferroelectric Thin Films

Wen-Lung Lee, Kai-Huang Chen, Ming-Cheng Kao, Cheng-Che Hsieh, Chien-Min Cheng

Sensors and Materials · 2026-05-22 · 38 (5) · 2739

DOI: 10.18494/sam6280 ↗

At a glance

Journal article in Sensors and Materials, published on 2026-05-22. Written by Wen-Lung Lee and 4 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

SrBi 4 Ti 4 O 15 (SBT) ferroelectric thin films were fabricated by a sol–gel spin-coating method and evaluated for resistive switching behavior in metal–insulator–metal (MIM) resistive random access memory (RRAM) devices. An SBT precursor solution was deposited on TiN/Si substrates, followed by rapid thermal annealing (RTA) and supercritical fluid (SCF) post-treatments to improve crystallinity, defect passivation, and interfacial quality. The SCF process was performed at 120 ℃ and 3000 psi using supercritical CO 2 with 0.1 vol.% H 2 O. Aluminum top electrodes were deposited to form Al/SBT/TiN/Si structures. X-ray diffraction confirmed the formation of the Aurivillius-type layered perovskite SBT phase with characteristic (119), (200), and (002) orientations. Moderate annealing temperatures yielded uniform grain distribution and reduced defect density, as observed by field-emission scanning electron microscopy. Electrical measurements demonstrated stable bipolar resistive switching with a forming voltage of approximately 6 V and low operating voltages during set/reset processes. The devices exhibited reliable endurance and retention characteristics. Current–voltage fitting revealed ohmic conduction in the low-resistance state owing to conductive filament formation, while Schottky emission and Poole–Frenkel transport dominated the high-resistance state. SCF-treated devices showed reduced leakage current and improved switching uniformity, indicating enhanced dielectric quality. These results demonstrate the feasibility of SBT thin films for low-power nonvolatile memory applications.

Cite

APA

Lee, W., Chen, K., Kao, M., Hsieh, C., & Cheng, C. (2026). Investigation of Supercritical Fluid Processing for Nonvolatile Resistive Random Access Memory Devices Based on SrBi4Ti4O15 Ferroelectric Thin Films. Sensors and Materials, 38(5), 2739. https://doi.org/10.18494/sam6280

Vancouver

Lee W, Chen K, Kao M, Hsieh C, Cheng C. Investigation of Supercritical Fluid Processing for Nonvolatile Resistive Random Access Memory Devices Based on SrBi4Ti4O15 Ferroelectric Thin Films. Sensors and Materials. 2026;38(5):2739. doi:10.18494/sam6280

BibTeX
@article{Lee2026,
  author = {Lee, Wen-Lung and Chen, Kai-Huang and Kao, Ming-Cheng and Hsieh, Cheng-Che and Cheng, Chien-Min},
  title = {Investigation of Supercritical Fluid Processing for Nonvolatile Resistive Random Access Memory Devices Based on SrBi4Ti4O15 Ferroelectric Thin Films},
  journal = {Sensors and Materials},
  year = {2026},
  volume = {38},
  number = {5},
  pages = {2739},
  doi = {10.18494/sam6280}
}
Start for free →