EUVIMEDEUVIMED entdecken
Crossref

Synthesis of multilayer graphene from plastic waste for the modification of battery cathode material

Md. Ramjan Ali, Md Osman Ali, Md. Erfanul Hasan Sakib, Nieom Biswas, Aneek Barua, Samim Mahbub, Salman Ali, Sumon Roy, Md Masud Rana, Md Akibul Islam, Ekramul Islam

International Journal of Sustainable Energy and Environmental Research · 17.07.2026 · 15 (2) · 1-17

DOI: 10.18488/13.v15i2.5047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Sustainable Energy and Environmental Research, online erschienen am 17.07.2026. Verfasst von Md. Ramjan Ali und 10 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The widespread production and use of plastics have raised environmental concerns due to their non-biodegradable nature. Effective waste management and conversion of waste into value-added products can be a sustainable solution. This study converts waste plastic into graphene to modify the Nickel–Manganese–Cobalt oxide (NMC) cathode with alumina (Al2O3). The Al2O3 percentage was varied from 1.0 to 2.0%, with a constant graphene percentage of 6.0%. Extensive analysis using Raman, XRD, FESEM, FTIR, UV-vis, and TGA demonstrated the successful transformation of waste plastic into multilayered graphene with graphitic stacking. The Raman analysis showed an ID/IG ratio of 1.07, which suggests edge defects and limited crystalline domain size, and an I2D/IG ratio less than 1.0 indicates the presence of multilayer graphene nanosheets. A UV absorbance peak at 295 nm in graphene highlights its suitability for optical applications. The thermal stability of graphene up to 600 °C makes it ideal for high-temperature applications. Nanosheet boundaries appear as irregular, overlapping lines or ridges on the surface and are stacked randomly with a crumpled morphology. SEM, FTIR, and XRD characterization of the NMC cathode with 2.0% Al2O3 and 6.0% showed better surface quality than other compositions. The charging test results for this cathode show good compatibility with electrodes and a stable interphase. Overall, the results suggest that rapid, large-scale synthesis of high-quality graphene from waste plastics offers significant potential for sustainable graphene production and is viable for future battery research.

Zitieren

APA

Ali, M. R., Ali, M. O., Sakib, M. E. H., Biswas, N., Barua, A., Mahbub, S., Ali, S., Roy, S., Rana, M. M., Islam, M. A., & Islam, E. (2026). Synthesis of multilayer graphene from plastic waste for the modification of battery cathode material. International Journal of Sustainable Energy and Environmental Research, 15(2), 1-17. https://doi.org/10.18488/13.v15i2.5047

Vancouver

Ali MR, Ali MO, Sakib MEH, Biswas N, Barua A, Mahbub S, et al. Synthesis of multilayer graphene from plastic waste for the modification of battery cathode material. International Journal of Sustainable Energy and Environmental Research. 2026;15(2):1-17. doi:10.18488/13.v15i2.5047

BibTeX
@article{Ali2026,
  author = {Ali, Md. Ramjan and Ali, Md Osman and Sakib, Md. Erfanul Hasan and Biswas, Nieom and Barua, Aneek and Mahbub, Samim and Ali, Salman and Roy, Sumon and Rana, Md Masud and Islam, Md Akibul and Islam, Ekramul},
  title = {Synthesis of multilayer graphene from plastic waste for the modification of battery cathode material},
  journal = {International Journal of Sustainable Energy and Environmental Research},
  year = {2026},
  volume = {15},
  number = {2},
  pages = {1--17},
  doi = {10.18488/13.v15i2.5047}
}
Kostenlos starten →