EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Pengaruh Kecepatan Putaran Menggunakan Pahat Karbida Tungsten Kobalt 6% terhadap Frekuensi Getaran dan Kekasaran Permukaan Baja ST 37

Chendri Johan, Paulus Aket, Rony Rukka, Lery Alfriany Salo

Quantum Teknika : Jurnal Teknik Mesin Terapan · 30.04.2026 · 7 (2) · 39-45

DOI: 10.18196/jqt.v7i2.30666 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Quantum Teknika : Jurnal Teknik Mesin Terapan, online erschienen am 30.04.2026. Verfasst von Chendri Johan und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to analyze the effect of rotational speed variations in the turning process using 6% cobalt tungsten carbide chisels on the vibration frequency and surface roughness of ST 37 steel. Tests were conducted using a conventional lathe with five rotational speed variations: 350 rpm, 400 rpm, 450 rpm, 500 rpm, and 550 rpm. Other cutting parameters were kept constant, namely feed rate of 0.7 mm/rev, depth of cut of 0.7 mm, and the use of SAE 10 oil cooling media. The results showed that the higher the rotational speed, the lower the surface roughness value. The highest roughness value was obtained at a speed of 350 rpm of 7.420 μm, while the lowest value was at 550 rpm of 4.66 μm. Conversely, the vibration frequency increased with increasing rotational speed. The lowest vibration frequency of 1.53 mm/s occurred at 350 rpm, while the highest value was 3.53 mm/s at 550 rpm. These results show that increasing the rotational speed produces a smoother surface, but increases tool vibration.

Zitieren

APA

Johan, C., Aket, P., Rukka, R., & Salo, L. A. (2026). Pengaruh Kecepatan Putaran Menggunakan Pahat Karbida Tungsten Kobalt 6% terhadap Frekuensi Getaran dan Kekasaran Permukaan Baja ST 37. Quantum Teknika : Jurnal Teknik Mesin Terapan, 7(2), 39-45. https://doi.org/10.18196/jqt.v7i2.30666

Vancouver

Johan C, Aket P, Rukka R, Salo LA. Pengaruh Kecepatan Putaran Menggunakan Pahat Karbida Tungsten Kobalt 6% terhadap Frekuensi Getaran dan Kekasaran Permukaan Baja ST 37. Quantum Teknika : Jurnal Teknik Mesin Terapan. 2026;7(2):39-45. doi:10.18196/jqt.v7i2.30666

BibTeX
@article{Johan2026,
  author = {Johan, Chendri and Aket, Paulus and Rukka, Rony and Salo, Lery Alfriany},
  title = {Pengaruh Kecepatan Putaran Menggunakan Pahat Karbida Tungsten Kobalt 6% terhadap Frekuensi Getaran dan Kekasaran Permukaan Baja ST 37},
  journal = {Quantum Teknika : Jurnal Teknik Mesin Terapan},
  year = {2026},
  volume = {7},
  number = {2},
  pages = {39--45},
  doi = {10.18196/jqt.v7i2.30666}
}
Kostenlos starten →