Analisis Hubungan Getaran dan Kekasaran Permukaan pada Proses Pembubutan Baja ST60
Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 500-507
DOI: 10.33504/jitt.v4i2.426 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Haradat Tahrir Algaza und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This study aims to analyze the relationship between vibration and surface roughness in the turning process of ST 60 steel. The turning process was carried out by varying machining parameters, namely depth of cut, spindle speed, and feed rate. An experimental method was employed using eight combinations of cutting parameters. The material used was cylindrical ST 60 steel. Vibration measurements were performed using a VibraPort 80, while surface roughness measurements were conducted using a Mitutoyo SJ-210 surface roughness tester. The results show that workpiece number 1 produced the best surface quality with a surface roughness (Ra) value of 1.42 µm. In contrast, workpiece number 8 exhibited the poorest surface quality with an Ra value of 3.12 µm. The differences in surface quality were influenced by the combination of turning parameters that led to increased vibration during the cutting process. These results indicate that vibration plays an important role in determining the final surface quality. Therefore, proper control of turning parameters is required to minimize vibration and achieve optimal surface quality in the turning of ST 60 steel.
Zitieren
APA
Algaza, H. T., Napitupulu, R., & Erwansyah, E. (2026). Analisis Hubungan Getaran dan Kekasaran Permukaan pada Proses Pembubutan Baja ST60. Jurnal Inovasi Teknologi Terapan, 4(2), 500-507. https://doi.org/10.33504/jitt.v4i2.426
Vancouver
Algaza HT, Napitupulu R, Erwansyah E. Analisis Hubungan Getaran dan Kekasaran Permukaan pada Proses Pembubutan Baja ST60. Jurnal Inovasi Teknologi Terapan. 2026;4(2):500-507. doi:10.33504/jitt.v4i2.426
BibTeX
@article{Algaza2026,
author = {Algaza, Haradat Tahrir and Napitupulu, Robert and Erwansyah, Erwansyah},
title = {Analisis Hubungan Getaran dan Kekasaran Permukaan pada Proses Pembubutan Baja ST60},
journal = {Jurnal Inovasi Teknologi Terapan},
year = {2026},
volume = {4},
number = {2},
pages = {500--507},
doi = {10.33504/jitt.v4i2.426}
}
EUVIMED