3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair
International Journal of Bioprinting · 02.08.2024 · 7 (3) · 367
DOI: 10.18063/ijb.v7i3.367 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.08.2024. Verfasst von Quanjing Mei und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, The Hong Kong Polytechnic University, Hung Hom, Hong Kong, China. Die Arbeit wurde bisher 83-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Three-dimensional (3D) bioprinting has become a promising strategy for bone manufacturing, with excellent control over geometry and microarchitectures of the scaffolds. The bioprinting ink for bone and cartilage engineering has thus become the key to developing 3D constructs for bone and cartilage defect repair. Maintaining the balance of cellular viability, drugs or cytokines’ function, and mechanical integrity is critical for constructing 3D bone and/or cartilage scaffolds. Photo-crosslinkable hydrogel is one of the most promising materials in tissue engineering; it can respond to light and induce structural or morphological transition. The biocompatibility, easy fabrication, as well as controllable mechanical and degradation properties of photo-crosslinkable hydrogel can meet various requirements of the bone and cartilage scaffolds, which enable it to serve as an effective bio-ink for 3D bioprinting. Here, in this review, we first introduce commonly used photo-crosslinkable hydrogel materials and additives (such as nanomaterials, functional cells, and drugs/cytokine), and then discuss the applications of the 3D bioprinted photo-crosslinkable hydrogel scaffolds for bone and cartilage engineering. Finally, we conclude the review with future perspectives about the development of 3D bioprinting photo-crosslinkable hydrogels in bone and cartilage engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, The Hong Kong Polytechnic University, Hung Hom, Hong Kong, China.
- Jihua Laboratory, Foshan, Guangdong, China.
Zitieren
APA
Mei, Q., Rao, J., Bei, H. P., Liu, Y., & Zhao, X. (2024). 3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair. International Journal of Bioprinting, 7(3), 367. https://doi.org/10.18063/ijb.v7i3.367
Vancouver
Mei Q, Rao J, Bei HP, Liu Y, Zhao X. 3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair. International Journal of Bioprinting. 2024;7(3):367. doi:10.18063/ijb.v7i3.367
BibTeX
@article{Mei2024,
author = {Mei, Quanjing and Rao, Jingdong and Bei, Ho Pan and Liu, Yaxiong and Zhao, Xin},
title = {3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair},
journal = {International Journal of Bioprinting},
year = {2024},
volume = {7},
number = {3},
pages = {367},
doi = {10.18063/ijb.v7i3.367}
}
EUVIMED