EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration

Changru Zhang, Ya Ren, Weiqing Kong, Yihao Liu, Heyue Li, Han Yang, Bin Cai, Kerong Dai, Chengwei Wang, Liang Tang, Haoyi Niu, Jinwu Wang

International Journal of Bioprinting · 02.06.2023 · 9 (5) · 767

DOI: 10.18063/ijb.767 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.06.2023. Verfasst von Changru Zhang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Southwest JiaoTong University College of Medicine, No. 111 North 1st Section of Second Ring Road, Chengdu 610036, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mesoporous bioglass (MBG) with excellent osteointegration, osteoinduction, and biodegradability is a promising material for bone regeneration. However, its clinical application is hindered by complex processing and a lack of personalization, low mechanical strength, and uncontrollable degradation rate. In this study, we developed a double-bond-functionalized photocurable mesoporous bioglass (PMBG) sol that enabled ultrafast photopolymerization within 5 s. By further integrating nanosized tricalcium phosphate (TCP) particles through three-dimensional (3D) printing technology, we fabricated personalized and highly porous PMBG/TCP biphasic scaffolds. The mechanical properties and degradation behavior of the scaffolds were regulated by varying the amount of TCP doping. In vitro and in vivo experiments verified that PMBG/TCP scaffolds slowly released SiO4 4- and Ca2+, forming a vascularized bone regeneration microenvironment within the fully interconnected pore channels of the scaffold. This microenvironment promoted angiogenesis and accelerated bone tissue regeneration. Overall, this work demonstrates the solution to the problem of complex processing and lack of personalization in bioglass scaffolds, and the developed PMBG/TCP biphasic scaffold is an ideal material for bone regeneration applications with broad clinical prospects.

Schlagwörter

Stichwörter der Autor:innen

AngiogenesisBone repairPersonalizationPhotocurable mesoporous bioglass

Autor:innen und Institutionen

  • Southwest JiaoTong University College of Medicine, No. 111 North 1st Section of Second Ring Road, Chengdu 610036, China.
  • Shanghai Key Laboratory of Orthopaedic Implant, Department of Orthopaedic Surgery, Shanghai Ninth People's Hospital Affiliated Shanghai Jiao Tong University School of Medicine, 639 Zhizaoju Rd, Shanghai 200011, China.
  • Institute of Translational Medicine, Shanghai JiaoTong University, No. 800 Dongchuan Road, Shanghai 200240, China.
  • Department of Spinal Surgery, The Affiliated Hospital of Qingdao University, No. 59 Haier Road, Qingdao, Shandong Province 266000, China.
  • Shanghai Seventh People's Hospital, Affiliated to Shanghai University of Traditional Chinese Medicine, Obstetrics and Gynecology, No. 358 Datong Road, Shanghai 200137, China.
  • Department of Rehabilitation Medicine, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, No. 500 Quxi Road, Shanghai 200011, China.

Zitieren

APA

Zhang, C., Ren, Y., Kong, W., Liu, Y., Li, H., Yang, H., Cai, B., Dai, K., Wang, C., Tang, L., Niu, H., & Wang, J. (2023). Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration. International Journal of Bioprinting, 9(5), 767. https://doi.org/10.18063/ijb.767

Vancouver

Zhang C, Ren Y, Kong W, Liu Y, Li H, Yang H, et al. Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration. International Journal of Bioprinting. 2023;9(5):767. doi:10.18063/ijb.767

BibTeX
@article{Zhang2023,
  author = {Zhang, Changru and Ren, Ya and Kong, Weiqing and Liu, Yihao and Li, Heyue and Yang, Han and Cai, Bin and Dai, Kerong and Wang, Chengwei and Tang, Liang and Niu, Haoyi and Wang, Jinwu},
  title = {Photocurable 3D-printed PMBG/TCP biphasic scaffold mimicking vasculature for bone regeneration},
  journal = {International Journal of Bioprinting},
  year = {2023},
  volume = {9},
  number = {5},
  pages = {767},
  doi = {10.18063/ijb.767}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche