3D-printed vascularized biofunctional scaffold for bone regeneration
International Journal of Bioprinting · 08.03.2023 · 9 (3) · 702
DOI: 10.18063/ijb.702 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 08.03.2023. Verfasst von Bojun Cao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University S…. Die Arbeit wurde bisher 46-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
3D-printed biofunctional scaffolds have promising applications in bone tissue regeneration. However, the development of bioinks with rapid internal vascularization capabilities and relatively sustained osteoinductive bioactivity is the primary technical challenge. In this work, we added rat platelet-rich plasma (PRP) to a methacrylated gelatin (GelMA)/methacrylated alginate (AlgMA) system, which was further modified by a nanoclay, laponite (Lap). We found that Lap was effective in retarding the release of multiple growth factors from the PRP-GelMA/AlgMA (PRP-GA) hydrogel and sustained the release for up to 2 weeks. Our in vitro studies showed that the PRP-GA@Lap hydrogel significantly promoted the proliferation, migration, and osteogenic differentiation of rat bone marrow mesenchymal stem cells, accelerated the formation of endothelial cell vascular patterns, and promoted macrophage M2 polarization. Furthermore, we printed hydrogel bioink with polycaprolactone (PCL) layer-by-layer to form active bone repair scaffolds and implanted them in subcutaneous and femoral condyle defects in rats. In vivo experiments showed that the PRP-GA@Lap/PCL scaffolds significantly promoted vascular inward growth and enhanced bone regeneration at the defect site. This work suggests that PRP-based 3D-bioprinted vascularized scaffolds will have great potential for clinical translation in the treatment of bone defects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shanghai Key Laboratory of Orthopaedic Implants, Department of Orthopaedic Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, 200011, China.
- Clinical and Translational Research Center for 3D Printing Technology, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, 200011, China.
- Shanghai Engineering Research Center of Innovative Orthopaedic Instruments and Personalized Medicine, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, 200011, China.
- Department of Orthopaedic Surgery, Renji Hospital, South Campus, Shanghai Jiao Tong University School of Medicine, Shanghai 201112, China.
- Department of Orthopedics, The Second Affiliated Hospital of Harbin Medical University, Harbin, China.
Zitieren
APA
Cao, B., Lin, J., Tan, J., Li, J., Ran, Z., Deng, L., & Hao, Y. (2023). 3D-printed vascularized biofunctional scaffold for bone regeneration. International Journal of Bioprinting, 9(3), 702. https://doi.org/10.18063/ijb.702
Vancouver
Cao B, Lin J, Tan J, Li J, Ran Z, Deng L, et al. 3D-printed vascularized biofunctional scaffold for bone regeneration. International Journal of Bioprinting. 2023;9(3):702. doi:10.18063/ijb.702
BibTeX
@article{Cao2023,
author = {Cao, Bojun and Lin, Jieming and Tan, Jia and Li, Jiaxin and Ran, Zhaoyang and Deng, Liang and Hao, Yongqiang},
title = {3D-printed vascularized biofunctional scaffold for bone regeneration},
journal = {International Journal of Bioprinting},
year = {2023},
volume = {9},
number = {3},
pages = {702},
doi = {10.18063/ijb.702}
}
EUVIMED