EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters

Raúl Sánchez-Sánchez, Jesús M Rodríguez-Rego, Antonio Macías-García, Laura Mendoza-Cerezo, Antonio Díaz-Parralejo

International Journal of Bioprinting · 16.02.2023 · 9 (2) · 687

DOI: 10.18063/ijb.687 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 16.02.2023. Verfasst von Raúl Sánchez-Sánchez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Mecánica, Energética y de los Materiales, Escuela de Ingenierías Industriales, Universidad de Extremadura, Avenida de Elva…. Die Arbeit wurde bisher 65-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional bioprinting is a technology in constant development, mainly due to its extraordinary potential to revolutionize regenerative medicine. It allows fabrication through the additive deposition of biochemical products, biological materials, and living cells for the generation of structures in bioengineering. There are various techniques and biomaterials or bioinks that are suitable for bioprinting. Their rheological properties are directly related to the quality of these processes. In this study, alginate-based hydrogels were prepared using CaCl2  as ionic crosslinking agent. Their rheological behavior was studied, and simulations of the bioprinting processes under predetermined conditions were carried out, looking for possible relationships between the rheological parameters and the variables used in the bioprinting processes. A clear linear relationship was found between the extrusion pressure and the flow consistency index rheological parameter, k, and between the extrusion time and the flow behavior index rheological parameter, n. This would allow simplification of the repetitive processes currently applied to optimize the extrusion pressure and dispensing head displacement speed, thereby helping to reduce the time and material used as well as to optimize the required bioprinting results.

Schlagwörter

Stichwörter der Autor:innen

BioinksBioprintingComputer simulationFluid dynamicsRheology

Autor:innen und Institutionen

  • Departamento de Ingeniería Mecánica, Energética y de los Materiales, Escuela de Ingenierías Industriales, Universidad de Extremadura, Avenida de Elvas, s/n. 06006-Badajoz. Spain.
  • Departamento de Expresión Gráfica, Escuela de Ingenierías Industriales, Universidad de Extremadura, Avenida de Elvas, s/n. 06006-Badajoz, Spain.

Zitieren

APA

Sánchez-Sánchez, R., Rodríguez-Rego, J. M., Macías-García, A., Mendoza-Cerezo, L., & Díaz-Parralejo, A. (2023). Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters. International Journal of Bioprinting, 9(2), 687. https://doi.org/10.18063/ijb.687

Vancouver

Sánchez-Sánchez R, Rodríguez-Rego JM, Macías-García A, Mendoza-Cerezo L, Díaz-Parralejo A. Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters. International Journal of Bioprinting. 2023;9(2):687. doi:10.18063/ijb.687

BibTeX
@article{SnchezSnchez2023,
  author = {Sánchez-Sánchez, Raúl and Rodríguez-Rego, Jesús M and Macías-García, Antonio and Mendoza-Cerezo, Laura and Díaz-Parralejo, Antonio},
  title = {Relationship between shear-thinning rheological properties of bioinks and bioprinting parameters},
  journal = {International Journal of Bioprinting},
  year = {2023},
  volume = {9},
  number = {2},
  pages = {687},
  doi = {10.18063/ijb.687}
}
Kostenlos starten →