Superconducting bearings based on closed HTS tape windings
Modern Transportation Systems and Technologies · 25.03.2026 · 12 (1) · 18-38
DOI: 10.17816/transsyst701964 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modern Transportation Systems and Technologies, online erschienen am 25.03.2026. Verfasst von Maxim А. Osipov und 4 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
AIM: This work aimed to analyze the feasibility of contactless bearings based on closed high-temperature superconducting (HTS) tape windings. To study the axial load on a bearing in a wide temperature range. METHODS: The bearing load was measured using an experimental setup based on a strain gauge and a three-dimensional positioning system. The superconductor was cooled using a single-stage cryocooler. The magnetic interaction in the bearing was calculated in the COMSOL Multiphysics simulation environment. RESULTS: The relationships between the axial force and the axial shift of a superconducting bearing based on closed HTS windings were obtained for temperatures ranging from 40 to 77.4 K and shift amplitudes of 1 to 9 mm. The numerical model was verified using experimental data. Its applicability was proven for closed superconducting currents in HTS tapes. The dynamics of magnetic flux penetration into HTS windings was calculated. CONCLUSION: Closed HTS windings can be successfully used to manufacture superconducting bearings. Closed HTS windings are most effective in systems where equilibrium shifts exceeding the half-period of the magnetic array are possible. The shift magnitude at which the greatest axial restoring force is achieved increases with temperature.
Zitieren
APA
Osipov, M. А., Starikovskii, A. S., Martirosian, I. V., Aleksandrov, D. A., & Pokrovskii, S. V. (2026). Superconducting bearings based on closed HTS tape windings. Modern Transportation Systems and Technologies, 12(1), 18-38. https://doi.org/10.17816/transsyst701964
Vancouver
Osipov MА, Starikovskii AS, Martirosian IV, Aleksandrov DA, Pokrovskii SV. Superconducting bearings based on closed HTS tape windings. Modern Transportation Systems and Technologies. 2026;12(1):18-38. doi:10.17816/transsyst701964
BibTeX
@article{Osipov2026,
author = {Osipov, Maxim А. and Starikovskii, Aleksandr S. and Martirosian, Irina V. and Aleksandrov, Dmitry A. and Pokrovskii, Sergey V.},
title = {Superconducting bearings based on closed HTS tape windings},
journal = {Modern Transportation Systems and Technologies},
year = {2026},
volume = {12},
number = {1},
pages = {18--38},
doi = {10.17816/transsyst701964}
}
EUVIMED