EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical and Analytical Investigation of a Cantilever Beam Using 3D and 1D Finite Element Models in Abaqus

MD MOHIBULLAH

Center of Engineering Sciences · 30.10.2026 · 1 (1) · 16-31

DOI: 10.65591/ces-66-2026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Center of Engineering Sciences, online erschienen am 30.10.2026. Verfasst von MD MOHIBULLAH. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research paper presents a numerical and analytical investigation of a prismatic steel cantilever beam to evaluate the performance of different finite element formulations in ABAQUS/Standard. The study is significant for validating the trade-offs between computational efficiency and local stress accuracy in structural modeling. A comparative analysis was conducted between 3D incompatible mode continuum elements (C3D8I), 1D linear Timoshenko beam elements (B21), and 1D cubic beam elements (B23) against the classical Euler–Bernoulli analytical solution. All models were subjected to a uniform loading equivalent to 0.5 MPa surface pressure. Key findings from the error analysis and mesh convergence study reveal that the B23 cubic element yielded the highest global accuracy, matching theoretical predictions with a maximum error of only 0.5%. While the 3D solid model provided superior localized stress data, the 1D models achieved high-fidelity results with 85-90% fewer degrees of freedom (DOFs) and significantly lower computational cost. These results demonstrate the reliability of higher-order 1D formulations for global structural analysis while identifying the specific boundary conditions where 3D modeling becomes necessary.

Zitieren

APA

MOHIBULLAH, M. (2026). Numerical and Analytical Investigation of a Cantilever Beam Using 3D and 1D Finite Element Models in Abaqus. Center of Engineering Sciences, 1(1), 16-31. https://doi.org/10.65591/ces-66-2026

Vancouver

MOHIBULLAH M. Numerical and Analytical Investigation of a Cantilever Beam Using 3D and 1D Finite Element Models in Abaqus. Center of Engineering Sciences. 2026;1(1):16-31. doi:10.65591/ces-66-2026

BibTeX
@article{MOHIBULLAH2026,
  author = {MOHIBULLAH, MD},
  title = {Numerical and Analytical Investigation of a Cantilever Beam Using 3D and 1D Finite Element Models in Abaqus},
  journal = {Center of Engineering Sciences},
  year = {2026},
  volume = {1},
  number = {1},
  pages = {16--31},
  doi = {10.65591/ces-66-2026}
}
Kostenlos starten →